From: Mihai Sain <mihai.sain@xxxxxxxxxxxxx>
I/O voltage for eMMC is always 3.3V because PA11__SDMMC0_VDDSEL is
tied with 10K resistor to GND. U13 switch S1 is always selected as
voltage rail of 3.3V for VCCQ power pin from MPU controller and eMMC flash.
Removing PA11 from pinctrl because it remains unused.
Signed-off-by: Mihai Sain <mihai.sain@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index b1e854f658de..9bf2ec0ba3e2 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -66,7 +66,7 @@ sdmmc0: sdio-host@a0000000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdmmc0_default>;
non-removable;
- mmc-ddr-1_8v;
+ mmc-ddr-3_3v;
status = "okay";
};
@@ -619,10 +619,9 @@ cmd_data {
bias-disable;
};
- ck_cd_rstn_vddsel {
+ ck_cd_rstn {
pinmux = <PIN_PA0__SDMMC0_CK>,
<PIN_PA10__SDMMC0_RSTN>,
- <PIN_PA11__SDMMC0_VDDSEL>,
<PIN_PA13__SDMMC0_CD>;
bias-disable;
};
--
2.25.1
