On Thu, 21 Oct 2021 11:27:01 +0200, Markus Schneider-Pargmann wrote: > DP_INTF is similar to DPI but does not have the exact same feature set > or register layouts. > > DP_INTF is the sink of the display pipeline that is connected to the > DisplayPort controller and encoder unit. It takes the same clocks as > DPI. > > Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx> > --- > > Notes: > Changes v4 -> v5: > - Newly created patch after realizing that the specific clocks for dpintf were > the same as engine and pixel clocks. > > .../bindings/display/mediatek/mediatek,dpi.yaml | 11 ++++++----- > 1 file changed, 6 insertions(+), 5 deletions(-) > Running 'make dtbs_check' with the schema in this patch gives the following warnings. Consider if they are expected or the schema is incorrect. These may not be new warnings. Note that it is not yet a requirement to have 0 warnings for dtbs_check. This will change in the future. Full log is available here: https://patchwork.ozlabs.org/patch/1544237 dpi@14014000: Additional properties are not allowed ('ports' was unexpected) arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dt.yaml arch/arm/boot/dts/mt7623n-rfb-emmc.dt.yaml dpi@14014000: compatible: Additional items are not allowed ('mediatek,mt2701-dpi' was unexpected) arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dt.yaml arch/arm/boot/dts/mt7623n-rfb-emmc.dt.yaml dpi@14014000: compatible: ['mediatek,mt7623-dpi', 'mediatek,mt2701-dpi'] is too long arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dt.yaml arch/arm/boot/dts/mt7623n-rfb-emmc.dt.yaml dpi@14014000: 'port' is a required property arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dt.yaml arch/arm/boot/dts/mt7623n-rfb-emmc.dt.yaml dpi@1401d000: Additional properties are not allowed ('power-domains' was unexpected) arch/arm64/boot/dts/mediatek/mt8173-elm.dt.yaml arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dt.yaml arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dt.yaml arch/arm64/boot/dts/mediatek/mt8173-evb.dt.yaml
