Add a very minimalistic BCM63138 Device Tree include file which
describes the BCM63138 SoC with only the basic set of required
peripherals:
- Cortex A9 CPUs
- ARM GIC
- ARM SCU
- PL310 Level-2 cache controller
- ARM TWD & Global timers
- ARM TWD watchdog
- legacy MIPS bus (UBUS)
- BCM6345-style UARTs (disabled by default)
Since the PL310 L2 cache controller does not come out of reset with
correct default values, we need to override the 'cache-sets' and
'cache-size' properties to get its geometry right.
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
Changes in v2:
- removed buses 'reg' properties since they are unused
- align buses 'ranges' properties on a nicer boundary
- moved mpcore peripherals one level higher in the axi bus
- added uart nodes since we have a driver for it (bcm63xx_uart)
arch/arm/boot/dts/bcm63138.dtsi | 134 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 134 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm63138.dtsi
diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi
new file mode 100644
index 000000000000..b7ce4da3d742
--- /dev/null
+++ b/arch/arm/boot/dts/bcm63138.dtsi
@@ -0,0 +1,134 @@
+/*
+ * Broadcom BCM63138 DSL SoCs Device Tree
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "brcm,bcm63138";
+ model = "Broadcom BCM63138 DSL SoC";
+ interrupt-parent = <&gic>;
+
+ aliases {
+ uart0 = &serial0;
+ uart1 = &serial1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ reg = <0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ reg = <1>;
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ arm_timer_clk: arm_timer_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <500000000>;
+ };
+
+ periph_clk: periph_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ clock-output-names = "periph";
+ };
+ };
+
+ /* ARM bus */
+ axi@80000000 {
+ compatible = "simple-bus";
+ ranges = <0 0x80000000 0x84000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ L2: cache-controller@1d000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x1d000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ cache-sets = <16>;
+ cache-size = <0x80000>;
+ interrupts = <GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ scu: scu@1e000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0x1e000 0x100>;
+ };
+
+ gic: interrupt-controller@1e100 {
+ compatible = "arm,cortex-a9-gic";
+ reg = <0x1f000 0x1000
+ 0x1e100 0x100>;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ };
+
+ global_timer: timer@1e200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x1e200 0x20>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ local_timer: local-timer@1e600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x1e600 0x20>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ twd_watchdog: watchdog@1e620 {
+ compatible = "arm,cortex-a9-twd-wdt";
+ reg = <0x1e620 0x20>;
+ interupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ /* Legacy UBUS base */
+ ubus@fffe8000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xfffe8000 0x8100>;
+
+ serial0: uart@600 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x600 0x1b>;
+ interrupts = <GIC_SPI 32 0>;
+ clocks = <&periph_clk>;
+ clock-names = "periph";
+ status = "disabled";
+ };
+
+ serial1: uart@620 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x620 0x1b>;
+ interrupts = <GIC_SPI 33 0>;
+ clocks = <&periph_clk>;
+ clock-names = "periph";
+ status = "disabled";
+ };
+ };
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
