On 19/10/2021 04:30, Dillon Min wrote:
> Hi Hans
>
> On Mon, 18 Oct 2021 at 18:25, Dillon Min <dillon.minfei@xxxxxxxxx> wrote:
>>
>> Hi Hans
>>
>> On Mon, 18 Oct 2021 at 17:30, Hans Verkuil <hverkuil-cisco@xxxxxxxxx> wrote:
>>>
>>> On 18/10/2021 07:04, dillon.minfei@xxxxxxxxx wrote:
>>>> From: Dillon Min <dillon.minfei@xxxxxxxxx>
>>>>
>>>> This V4L2 subdev m2m driver enables Chrom-Art Accelerator unit
>>>> of STMicroelectronics STM32 SoC series.
>>>>
>>>> Currently support r2m, m2m, m2m_pfc functions.
>>>> - r2m, Filling a part or the whole of a destination image with a specific
>>>> color.
>>>> - m2m, Copying a part or the whole of a source image into a part or the
>>>> whole of a destination.
>>>> - m2m_pfc, Copying a part or the whole of a source image into a part or the
>>>> whole of a destination image with a pixel format conversion.
>>>>
>>>> Signed-off-by: Dillon Min <dillon.minfei@xxxxxxxxx>
>>>> ---
>>>> v5:
>>>> - remove useless log from dma2d driver.
>>>> - update config VIDEO_STM32_DMA2D description.
>>>>
>>>> drivers/media/platform/Kconfig | 11 +
>>>> drivers/media/platform/Makefile | 1 +
>>>> drivers/media/platform/stm32/Makefile | 2 +
>>>> drivers/media/platform/stm32/dma2d/dma2d-hw.c | 143 +++++
>>>> drivers/media/platform/stm32/dma2d/dma2d-regs.h | 113 ++++
>>>> drivers/media/platform/stm32/dma2d/dma2d.c | 739 ++++++++++++++++++++++++
>>>> drivers/media/platform/stm32/dma2d/dma2d.h | 135 +++++
>>>> 7 files changed, 1144 insertions(+)
>>>> create mode 100644 drivers/media/platform/stm32/dma2d/dma2d-hw.c
>>>> create mode 100644 drivers/media/platform/stm32/dma2d/dma2d-regs.h
>>>> create mode 100644 drivers/media/platform/stm32/dma2d/dma2d.c
>>>> create mode 100644 drivers/media/platform/stm32/dma2d/dma2d.h
>>>>
>>>> diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
>>>> index d9f90084c2f6..0b3bdf56b44e 100644
>>>> --- a/drivers/media/platform/Kconfig
>>>> +++ b/drivers/media/platform/Kconfig
>>>> @@ -476,6 +476,17 @@ config VIDEO_STI_DELTA_DRIVER
>>>>
>>>> endif # VIDEO_STI_DELTA
>>>>
>>>> +config VIDEO_STM32_DMA2D
>>>> + tristate "STM32 Chrom-Art Accelerator (DMA2D)"
>>>> + depends on (VIDEO_DEV && VIDEO_V4L2 && ARCH_STM32) || COMPILE_TEST
>>>> + select VIDEOBUF2_DMA_CONTIG
>>>> + select V4L2_MEM2MEM_DEV
>>>> + help
>>>> + Enables DMA2D hwarware support on stm32.
>>>> +
>>>> + The STM32 DMA2D is a memory-to-memory engine for pixel conversion
>>>> + and specialized DMA dedicated to image manipulation.
>>>> +
>>>> config VIDEO_RENESAS_FDP1
>>>> tristate "Renesas Fine Display Processor"
>>>> depends on VIDEO_DEV && VIDEO_V4L2
>>>> diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
>>>> index 73ce083c2fc6..46f1c05bc576 100644
>>>> --- a/drivers/media/platform/Makefile
>>>> +++ b/drivers/media/platform/Makefile
>>>> @@ -70,6 +70,7 @@ obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel/
>>>> obj-$(CONFIG_VIDEO_ATMEL_XISC) += atmel/
>>>>
>>>> obj-$(CONFIG_VIDEO_STM32_DCMI) += stm32/
>>>> +obj-$(CONFIG_VIDEO_STM32_DMA2D) += stm32/
>>>>
>>>> obj-$(CONFIG_VIDEO_MEDIATEK_VPU) += mtk-vpu/
>>>>
>>>> diff --git a/drivers/media/platform/stm32/Makefile b/drivers/media/platform/stm32/Makefile
>>>> index 48b36db2c2e2..896ef98a73ab 100644
>>>> --- a/drivers/media/platform/stm32/Makefile
>>>> +++ b/drivers/media/platform/stm32/Makefile
>>>> @@ -1,2 +1,4 @@
>>>> # SPDX-License-Identifier: GPL-2.0-only
>>>> obj-$(CONFIG_VIDEO_STM32_DCMI) += stm32-dcmi.o
>>>> +stm32-dma2d-objs := dma2d/dma2d.o dma2d/dma2d-hw.o
>>>> +obj-$(CONFIG_VIDEO_STM32_DMA2D) += stm32-dma2d.o
>>>> diff --git a/drivers/media/platform/stm32/dma2d/dma2d-hw.c b/drivers/media/platform/stm32/dma2d/dma2d-hw.c
>>>> new file mode 100644
>>>> index 000000000000..8c1c664ab13b
>>>> --- /dev/null
>>>> +++ b/drivers/media/platform/stm32/dma2d/dma2d-hw.c
>>>> @@ -0,0 +1,143 @@
>>>> +// SPDX-License-Identifier: GPL-2.0-or-later
>>>> +/*
>>>> + * ST stm32 Chrom-Art - 2D Graphics Accelerator Driver
>>>> + *
>>>> + * Copyright (c) 2021 Dillon Min
>>>> + * Dillon Min, <dillon.minfei@xxxxxxxxx>
>>>> + *
>>>> + * based on s5p-g2d
>>>> + *
>>>> + * Copyright (c) 2011 Samsung Electronics Co., Ltd.
>>>> + * Kamil Debski, <k.debski@xxxxxxxxxxx>
>>>> + */
>>>> +
>>>> +#include <linux/io.h>
>>>> +
>>>> +#include "dma2d.h"
>>>> +#include "dma2d-regs.h"
>>>> +
>>>> +static inline u32 reg_read(void __iomem *base, u32 reg)
>>>> +{
>>>> + return readl_relaxed(base + reg);
>>>> +}
>>>> +
>>>> +static inline void reg_write(void __iomem *base, u32 reg, u32 val)
>>>> +{
>>>> + writel_relaxed(val, base + reg);
>>>> +}
>>>> +
>>>> +static inline void reg_set(void __iomem *base, u32 reg, u32 mask)
>>>> +{
>>>> + reg_write(base, reg, reg_read(base, reg) | mask);
>>>> +}
>>>> +
>>>> +static inline void reg_clear(void __iomem *base, u32 reg, u32 mask)
>>>> +{
>>>> + reg_write(base, reg, reg_read(base, reg) & ~mask);
>>>> +}
>>>> +
>>>> +static inline void reg_update_bits(void __iomem *base, u32 reg, u32 mask,
>>>> + u32 val)
>>>> +{
>>>> + reg_write(base, reg, (reg_read(base, reg) & ~mask) | val);
>>>> +}
>>>> +
>>>> +void dma2d_start(struct dma2d_dev *d)
>>>> +{
>>>> + reg_update_bits(d->regs, DMA2D_CR_REG, CR_START, CR_START);
>>>> +}
>>>> +
>>>> +u32 dma2d_get_int(struct dma2d_dev *d)
>>>> +{
>>>> + return reg_read(d->regs, DMA2D_ISR_REG);
>>>> +}
>>>> +
>>>> +void dma2d_clear_int(struct dma2d_dev *d)
>>>> +{
>>>> + u32 isr_val = reg_read(d->regs, DMA2D_ISR_REG);
>>>> +
>>>> + reg_write(d->regs, DMA2D_IFCR_REG, isr_val & 0x003f);
>>>> +}
>>>> +
>>>> +void dma2d_config_common(struct dma2d_dev *d, enum dma2d_op_mode op_mode,
>>>> + u16 width, u16 height)
>>>> +{
>>>> + reg_update_bits(d->regs, DMA2D_CR_REG, CR_MODE_MASK,
>>>> + op_mode << CR_MODE_SHIFT);
>>>> +
>>>> + reg_write(d->regs, DMA2D_NLR_REG, (width << 16) | height);
>>>> +}
>>>> +
>>>> +void dma2d_config_out(struct dma2d_dev *d, struct dma2d_frame *frm,
>>>> + dma_addr_t o_addr)
>>>> +{
>>>> + reg_update_bits(d->regs, DMA2D_CR_REG, CR_CEIE, CR_CEIE);
>>>> + reg_update_bits(d->regs, DMA2D_CR_REG, CR_CTCIE, CR_CTCIE);
>>>> + reg_update_bits(d->regs, DMA2D_CR_REG, CR_CAEIE, CR_CAEIE);
>>>> + reg_update_bits(d->regs, DMA2D_CR_REG, CR_TCIE, CR_TCIE);
>>>> + reg_update_bits(d->regs, DMA2D_CR_REG, CR_TEIE, CR_TEIE);
>>>> +
>>>> + if (frm->fmt->cmode >= CM_MODE_ARGB8888 &&
>>>> + frm->fmt->cmode <= CM_MODE_ARGB4444)
>>>> + reg_update_bits(d->regs, DMA2D_OPFCCR_REG, OPFCCR_CM_MASK,
>>>> + frm->fmt->cmode);
>>>> +
>>>> + reg_write(d->regs, DMA2D_OMAR_REG, o_addr);
>>>> +
>>>> + reg_write(d->regs, DMA2D_OCOLR_REG,
>>>> + (frm->a_rgb[3] << 24) |
>>>> + (frm->a_rgb[2] << 16) |
>>>> + (frm->a_rgb[1] << 8) |
>>>> + frm->a_rgb[0]);
>>>> +
>>>> + reg_update_bits(d->regs, DMA2D_OOR_REG, OOR_LO_MASK,
>>>> + frm->line_offset & 0x3fff);
>>>> +}
>>>> +
>>>> +void dma2d_config_fg(struct dma2d_dev *d, struct dma2d_frame *frm,
>>>> + dma_addr_t f_addr)
>>>> +{
>>>> + reg_write(d->regs, DMA2D_FGMAR_REG, f_addr);
>>>> + reg_update_bits(d->regs, DMA2D_FGOR_REG, FGOR_LO_MASK,
>>>> + frm->line_offset);
>>>> +
>>>> + if (frm->fmt->cmode >= CM_MODE_ARGB8888 &&
>>>> + frm->fmt->cmode <= CM_MODE_A4)
>>>> + reg_update_bits(d->regs, DMA2D_FGPFCCR_REG, FGPFCCR_CM_MASK,
>>>> + frm->fmt->cmode);
>>>> +
>>>> + reg_update_bits(d->regs, DMA2D_FGPFCCR_REG, FGPFCCR_AM_MASK,
>>>> + (frm->a_mode << 16) & 0x03);
>>>> +
>>>> + reg_update_bits(d->regs, DMA2D_FGPFCCR_REG, FGPFCCR_ALPHA_MASK,
>>>> + frm->a_rgb[3] << 24);
>>>> +
>>>> + reg_write(d->regs, DMA2D_FGCOLR_REG,
>>>> + (frm->a_rgb[2] << 16) |
>>>> + (frm->a_rgb[1] << 8) |
>>>> + frm->a_rgb[0]);
>>>> +}
>>>> +
>>>> +void dma2d_config_bg(struct dma2d_dev *d, struct dma2d_frame *frm,
>>>> + dma_addr_t b_addr)
>>>> +{
>>>> + reg_write(d->regs, DMA2D_BGMAR_REG, b_addr);
>>>> + reg_update_bits(d->regs, DMA2D_BGOR_REG, BGOR_LO_MASK,
>>>> + frm->line_offset);
>>>> +
>>>> + if (frm->fmt->cmode >= CM_MODE_ARGB8888 &&
>>>> + frm->fmt->cmode <= CM_MODE_A4)
>>>> + reg_update_bits(d->regs, DMA2D_BGPFCCR_REG, BGPFCCR_CM_MASK,
>>>> + frm->fmt->cmode);
>>>> +
>>>> + reg_update_bits(d->regs, DMA2D_BGPFCCR_REG, BGPFCCR_AM_MASK,
>>>> + (frm->a_mode << 16) & 0x03);
>>>> +
>>>> + reg_update_bits(d->regs, DMA2D_BGPFCCR_REG, BGPFCCR_ALPHA_MASK,
>>>> + frm->a_rgb[3] << 24);
>>>> +
>>>> + reg_write(d->regs, DMA2D_BGCOLR_REG,
>>>> + (frm->a_rgb[2] << 16) |
>>>> + (frm->a_rgb[1] << 8) |
>>>> + frm->a_rgb[0]);
>>>> +}
>>>> diff --git a/drivers/media/platform/stm32/dma2d/dma2d-regs.h b/drivers/media/platform/stm32/dma2d/dma2d-regs.h
>>>> new file mode 100644
>>>> index 000000000000..2128364406c8
>>>> --- /dev/null
>>>> +++ b/drivers/media/platform/stm32/dma2d/dma2d-regs.h
>>>> @@ -0,0 +1,113 @@
>>>> +/* SPDX-License-Identifier: GPL-2.0-or-later */
>>>> +/*
>>>> + * ST stm32 Chrom-Art - 2D Graphics Accelerator Driver
>>>> + *
>>>> + * Copyright (c) 2021 Dillon Min
>>>> + * Dillon Min, <dillon.minfei@xxxxxxxxx>
>>>> + *
>>>> + * based on s5p-g2d
>>>> + *
>>>> + * Copyright (c) 2011 Samsung Electronics Co., Ltd.
>>>> + * Kamil Debski, <k.debski@xxxxxxxxxxx>
>>>> + */
>>>> +
>>>> +#ifndef __DMA2D_REGS_H__
>>>> +#define __DMA2D_REGS_H__
>>>> +
>>>> +#define DMA2D_CR_REG 0x0000
>>>> +#define CR_MODE_MASK GENMASK(17, 16)
>>>> +#define CR_MODE_SHIFT 16
>>>> +#define CR_M2M 0x0000
>>>> +#define CR_M2M_PFC BIT(16)
>>>> +#define CR_M2M_BLEND BIT(17)
>>>> +#define CR_R2M (BIT(17) | BIT(16))
>>>> +#define CR_CEIE BIT(13)
>>>> +#define CR_CTCIE BIT(12)
>>>> +#define CR_CAEIE BIT(11)
>>>> +#define CR_TWIE BIT(10)
>>>> +#define CR_TCIE BIT(9)
>>>> +#define CR_TEIE BIT(8)
>>>> +#define CR_ABORT BIT(2)
>>>> +#define CR_SUSP BIT(1)
>>>> +#define CR_START BIT(0)
>>>> +
>>>> +#define DMA2D_ISR_REG 0x0004
>>>> +#define ISR_CEIF BIT(5)
>>>> +#define ISR_CTCIF BIT(4)
>>>> +#define ISR_CAEIF BIT(3)
>>>> +#define ISR_TWIF BIT(2)
>>>> +#define ISR_TCIF BIT(1)
>>>> +#define ISR_TEIF BIT(0)
>>>> +
>>>> +#define DMA2D_IFCR_REG 0x0008
>>>> +#define IFCR_CCEIF BIT(5)
>>>> +#define IFCR_CCTCIF BIT(4)
>>>> +#define IFCR_CAECIF BIT(3)
>>>> +#define IFCR_CTWIF BIT(2)
>>>> +#define IFCR_CTCIF BIT(1)
>>>> +#define IFCR_CTEIF BIT(0)
>>>> +
>>>> +#define DMA2D_FGMAR_REG 0x000c
>>>> +#define DMA2D_FGOR_REG 0x0010
>>>> +#define FGOR_LO_MASK GENMASK(13, 0)
>>>> +
>>>> +#define DMA2D_BGMAR_REG 0x0014
>>>> +#define DMA2D_BGOR_REG 0x0018
>>>> +#define BGOR_LO_MASK GENMASK(13, 0)
>>>> +
>>>> +#define DMA2D_FGPFCCR_REG 0x001c
>>>> +#define FGPFCCR_ALPHA_MASK GENMASK(31, 24)
>>>> +#define FGPFCCR_AM_MASK GENMASK(17, 16)
>>>> +#define FGPFCCR_CS_MASK GENMASK(15, 8)
>>>> +#define FGPFCCR_START BIT(5)
>>>> +#define FGPFCCR_CCM_RGB888 BIT(4)
>>>> +#define FGPFCCR_CM_MASK GENMASK(3, 0)
>>>> +
>>>> +#define DMA2D_FGCOLR_REG 0x0020
>>>> +#define FGCOLR_REG_MASK GENMASK(23, 16)
>>>> +#define FGCOLR_GREEN_MASK GENMASK(15, 8)
>>>> +#define FGCOLR_BLUE_MASK GENMASK(7, 0)
>>>> +
>>>> +#define DMA2D_BGPFCCR_REG 0x0024
>>>> +#define BGPFCCR_ALPHA_MASK GENMASK(31, 24)
>>>> +#define BGPFCCR_AM_MASK GENMASK(17, 16)
>>>> +#define BGPFCCR_CS_MASK GENMASK(15, 8)
>>>> +#define BGPFCCR_START BIT(5)
>>>> +#define BGPFCCR_CCM_RGB888 BIT(4)
>>>> +#define BGPFCCR_CM_MASK GENMASK(3, 0)
>>>> +
>>>> +#define DMA2D_BGCOLR_REG 0x0028
>>>> +#define BGCOLR_REG_MASK GENMASK(23, 16)
>>>> +#define BGCOLR_GREEN_MASK GENMASK(15, 8)
>>>> +#define BGCOLR_BLUE_MASK GENMASK(7, 0)
>>>> +
>>>> +#define DMA2D_OPFCCR_REG 0x0034
>>>> +#define OPFCCR_CM_MASK GENMASK(2, 0)
>>>> +
>>>> +#define DMA2D_OCOLR_REG 0x0038
>>>> +#define OCOLR_ALPHA_MASK GENMASK(31, 24)
>>>> +#define OCOLR_RED_MASK GENMASK(23, 16)
>>>> +#define OCOLR_GREEN_MASK GENMASK(15, 8)
>>>> +#define OCOLR_BLUE_MASK GENMASK(7, 0)
>>>> +
>>>> +#define DMA2D_OMAR_REG 0x003c
>>>> +
>>>> +#define DMA2D_OOR_REG 0x0040
>>>> +#define OOR_LO_MASK GENMASK(13, 0)
>>>> +
>>>> +#define DMA2D_NLR_REG 0x0044
>>>> +#define NLR_PL_MASK GENMASK(29, 16)
>>>> +#define NLR_NL_MASK GENMASK(15, 0)
>>>> +
>>>> +/* Hardware limits */
>>>> +#define MAX_WIDTH 0x3fff
>>>> +#define MAX_HEIGHT 0xffff
>>>
>>> I think these max width/height values are unrealistic. Even though the hardware
>>> theoretically supports this, it is causing the memory alloc failures.
>>
>> Oh, I suppose the memory alloc failures test case was fixed, designed
>> by v4l2-compliance , actually it depends on the driver's ability.
>>
>>>
>>> I see that the camera driver has 2592x2592 as the max width/height, so perhaps
>>> that should be used? Or alternatively the max resolution of the video output driver,
>>> whatever that is?
>>
>> I will try 2592x2592, and 2048x2048[display driver]. It fits the
>> camera's output or display input is a good idea.
>
> Tried 2592x2592 and 2048x2048, both failed on my setup due to the low
> memory size. I'd like to send v6 with max 2592x2592 if you prefer?
Sounds good.
Hans
>
> fail: v4l2-test-buffers.cpp(1349): q.reqbufs(node, 2)
> BA24 (32-bit ARGB 8-8-8-8) 2048x2048 -> BA24 (32-bit ARGB
> 8-8-8-8) 2048x2048: FAIL
>
> fail: v4l2-test-buffers.cpp(1349): q.reqbufs(node, 2)
> BA24 (32-bit ARGB 8-8-8-8) 2592x2592 -> BA24 (32-bit ARGB
> 8-8-8-8) 2592x2592: FAIL
>
> ~ # free
> total used free shared
> buff/cache available
> Mem: 15648 4060 8276 0 3312 7648
>
> Thanks & Regards
>
> Dillon
>
>>
>> [display driver] drivers/gpu/drm/stm/drv.c
>>
>> Thanks & Regards
>> Dillon
>>
>>>
>>> Regards,
>>>
>>> Hans
>>>
>>>> +
>>>> +#define DEFAULT_WIDTH 240
>>>> +#define DEFAULT_HEIGHT 320
>>>> +#define DEFAULT_SIZE 307200
>>>> +
>>>> +#define CM_MODE_ARGB8888 0x00
>>>> +#define CM_MODE_ARGB4444 0x04
>>>> +#define CM_MODE_A4 0x0a
>>>> +#endif /* __DMA2D_REGS_H__ */
