Re: [PATCH net-next v2 1/4] dt-bindings: dmaengine: bam_dma: Add "powered remotely" mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Stephan,

On Mon, 11 Oct 2021 at 20:12, Stephan Gerhold <stephan@xxxxxxxxxxx> wrote:
>
> In some configurations, the BAM DMA controller is set up by a remote
> processor and the local processor can simply start making use of it
> without setting up the BAM. This is already supported using the
> "qcom,controlled-remotely" property.
>
> However, for some reason another possible configuration is that the
> remote processor is responsible for powering up the BAM, but we are
> still responsible for initializing it (e.g. resetting it etc). Add
> a "qcom,powered-remotely" property to describe that configuration.
>
> Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
> ---
> Changes since RFC:
>   - Rename qcom,remote-power-collapse -> qcom,powered-remotely
>     for consistency with "qcom,controlled-remotely"
>
> NOTE: This is *not* a compile-time requirement for the BAM-DMUX driver
>       so this could also go through the dmaengine tree.
>
> Also note that there is an ongoing effort to convert these bindings
> to DT schema but sadly there were not any updates for a while. :/
> https://lore.kernel.org/linux-arm-msm/20210519143700.27392-2-bhupesh.sharma@xxxxxxxxxx/

Seems you missed the latest series posted last week - [1]. Sorry I got
a bit delayed posting it due to being caught up in other patches.

Maybe you can rebase your patch on the same and use the YAML bindings
for the qcom,bam_dma controller.

[1]. https://lore.kernel.org/linux-arm-msm/20211013105541.68045-1-bhupesh.sharma@xxxxxxxxxx/T/#t

Regards,
Bhupesh

> ---
>  Documentation/devicetree/bindings/dma/qcom_bam_dma.txt | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
> index cf5b9e44432c..6e9a5497b3f2 100644
> --- a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
> +++ b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
> @@ -15,6 +15,8 @@ Required properties:
>    the secure world.
>  - qcom,controlled-remotely : optional, indicates that the bam is controlled by
>    remote proccessor i.e. execution environment.
> +- qcom,powered-remotely : optional, indicates that the bam is powered up by
> +  a remote processor but must be initialized by the local processor.
>  - num-channels : optional, indicates supported number of DMA channels in a
>    remotely controlled bam.
>  - qcom,num-ees : optional, indicates supported number of Execution Environments
> --
> 2.33.0
>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux