This patch enables two properties for the QCA8337 switches on the MX65. Set the SGMII transmit clock to falling edge "qca,sgmii-txclk-falling-edge" to conform to the OEM configuration [1]. The new explicit PLL enable option "qca,sgmii-enable-pll" is required [2]. [1] https://git.kernel.org/netdev/net-next/c/6c43809bf1be [2] https://git.kernel.org/netdev/net-next/c/bbc4799e8bb6 Signed-off-by: Matthew Hagan <mnhagan88@xxxxxxxxx> --- arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi index 102acd85fab2..ba01054a76cf 100644 --- a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi +++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi @@ -118,6 +118,8 @@ port@0 { reg = <0>; ethernet = <&sgmii1>; phy-mode = "sgmii"; + qca,sgmii-enable-pll; + qca,sgmii-txclk-falling-edge; fixed-link { speed = <1000>; full-duplex; @@ -194,6 +196,8 @@ port@0 { reg = <0>; ethernet = <&sgmii0>; phy-mode = "sgmii"; + qca,sgmii-enable-pll; + qca,sgmii-txclk-falling-edge; fixed-link { speed = <1000>; full-duplex; -- 2.27.0
