From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
The regulator reg_rst_eth2 should keep the reset signal of the USB ethernet
adapter deasserted anytime. Fix the polarity and mark it as always-on.
Anyway, using the regulator is only a workaround for the missing support of
specifying a reset GPIO for USB devices in a generic way. As we don't
have a solution for this at the moment, at least fix the current
workaround.
Fixes: 8668d8b2e67f ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
---
Changes in v2:
* Fix the commit ref in the Fixes tag
* Improve commit message
* Remove useless change of uncontrolled reg_vdd_5v
---
arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
index 5f6fc4c2c529..a192a047f264 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
@@ -70,7 +70,9 @@ reg_rst_eth2: regulator-rst-eth2 {
regulator-name = "rst-usb-eth2";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb_eth2>;
- gpio = <&gpio3 2 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
};
reg_vdd_5v: regulator-5v {
--
2.33.0
