From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
This is a set of enhancements and fixes for the devicetrees of the Kontron
SL/BL i.MX8MM SoMs and boards.
See the individual patches for more information and changelogs.
For v2, the review comments from Shawn ahve been taken into account
(thanks!) and the patches 7 and 8 have been dropped, as they were already
applied separately.
Frieder Schrempf (6):
arm64: dts: imx8mm-kontron: Add support for ultra high speed modes on
SD card
arm64: dts: imx8mm-kontron: Make sure SOC and DRAM supply voltages are
correct
arm64: dts: imx8mm-kontron: Set lower limit of VDD_SNVS to 800 mV
arm64: dts: imx8mm-kontron: Fix polarity of reg_rst_eth2
arm64: dts: imx8mm-kontron: Fix CAN SPI clock frequency
arm64: dts: imx8mm-kontron: Fix connection type for VSC8531 RGMII PHY
.../dts/freescale/imx8mm-kontron-n801x-s.dts | 36 ++++++++++++++++---
.../freescale/imx8mm-kontron-n801x-som.dtsi | 10 ++++--
2 files changed, 39 insertions(+), 7 deletions(-)
--
2.33.0
