Add device tree bindings for U-Boot environment NVMEM provider. U-Boot environment can be stored at a specific offset of a MTD device, EEPROM, MMC, NAND or SATA device, on an UBI volume, or in a file on a filesystem. The environment can contain information such as device's MAC address, which should be used by the ethernet controller node. Signed-off-by: Marek Behún <kabel@xxxxxxxxxx> --- .../bindings/nvmem/denx,u-boot-env.yaml | 88 +++++++++++++++++++ include/dt-bindings/nvmem/u-boot-env.h | 18 ++++ 2 files changed, 106 insertions(+) create mode 100644 Documentation/devicetree/bindings/nvmem/denx,u-boot-env.yaml create mode 100644 include/dt-bindings/nvmem/u-boot-env.h diff --git a/Documentation/devicetree/bindings/nvmem/denx,u-boot-env.yaml b/Documentation/devicetree/bindings/nvmem/denx,u-boot-env.yaml new file mode 100644 index 000000000000..56505c08e622 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/denx,u-boot-env.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/denx,u-boot-env.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: U-Boot environment NVMEM Device Tree Bindings + +maintainers: + - Marek Behún <kabel@xxxxxxxxxx> + +description: + This binding represents U-Boot's environment NVMEM settings which can be + stored on a specific offset of an EEPROM, MMC, NAND or SATA device, or + an UBI volume, or in a file on a filesystem. + +properties: + compatible: + const: denx,u-boot-env + + path: + description: + The path to the file containing the environment if on a filesystem. + $ref: /schemas/types.yaml#/definitions/string + +patternProperties: + "^[^=]+$": + type: object + + description: + This node represents one U-Boot environment variable, which is also one + NVMEM data cell. + + properties: + name: + description: + If the variable name contains characters not allowed in device tree node + name, use this property to specify the name, otherwise the variable name + is equal to node name. + $ref: /schemas/types.yaml#/definitions/string + + type: + description: + Type of the variable. Since variables, even integers and MAC addresses, + are stored as strings in U-Boot environment, for proper conversion the + type needs to be specified. Use one of the U_BOOT_ENV_TYPE_* prefixed + definitions from include/dt-bindings/nvmem/u-boot-env.h. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 5 + + required: + - type + +required: + - compatible + +additionalProperties: true + +examples: + - | + + #include <dt-bindings/nvmem/u-boot-env.h> + + spi-flash { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@180000 { + compatible = "denx,u-boot-env"; + label = "u-boot-env"; + reg = <0x180000 0x10000>; + + eth0_addr: ethaddr { + type = <U_BOOT_ENV_TYPE_MAC_ADDRESS>; + }; + }; + }; + }; + + ethernet-controller { + nvmem-cells = <ð0_addr>; + nvmem-cell-names = "mac-address"; + }; + +... diff --git a/include/dt-bindings/nvmem/u-boot-env.h b/include/dt-bindings/nvmem/u-boot-env.h new file mode 100644 index 000000000000..760e5b240619 --- /dev/null +++ b/include/dt-bindings/nvmem/u-boot-env.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Macros for U-Boot environment NVMEM device tree bindings. + * + * Copyright (C) 2021 Marek Behún <kabel@xxxxxxxxxx> + */ + +#ifndef __DT_BINDINGS_NVMEM_U_BOOT_ENV_H +#define __DT_BINDINGS_NVMEM_U_BOOT_ENV_H + +#define U_BOOT_ENV_TYPE_STRING 0 +#define U_BOOT_ENV_TYPE_ULONG 1 +#define U_BOOT_ENV_TYPE_BOOL 2 +#define U_BOOT_ENV_TYPE_MAC_ADDRESS 3 +#define U_BOOT_ENV_TYPE_ULONG_HEX 4 +#define U_BOOT_ENV_TYPE_ULONG_DEC 5 + +#endif /* __DT_BINDINGS_NVMEM_U_BOOT_ENV_H */ -- 2.32.0
