Hi Yuiko,
On Thu, Oct 18, 2018 at 8:16 PM Yuiko Oshino <yuiko.oshino@xxxxxxxxxxxxx> wrote:
> Add support for Microchip Technology KSZ9131 10/100/1000 Ethernet PHY
>
> Signed-off-by: Yuiko Oshino <yuiko.oshino@xxxxxxxxxxxxx>
Thanks for your patch, which is commit 806700bab41e9297
("dt-bindings: net: add support for Microchip KSZ9131") in v4.20.
> --- a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
> +++ b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
> @@ -1,4 +1,4 @@
> -Micrel KSZ9021/KSZ9031 Gigabit Ethernet PHY
> +Micrel KSZ9021/KSZ9031/KSZ9131 Gigabit Ethernet PHY
>
> Some boards require special tuning values, particularly when it comes
> to clock delays. You can specify clock delay values in the PHY OF
> @@ -64,6 +64,32 @@ KSZ9031:
> Attention: The link partner must be configurable as slave otherwise
> no link will be established.
>
> +KSZ9131:
> +
> + All skew control options are specified in picoseconds. The increment
> + step is 100ps. Unlike KSZ9031, the values represent picoseccond delays.
> + A negative value can be assigned as rxc-skew-psec = <(-100)>;.
> +
> + Optional properties:
> +
> + Range of the value -700 to 2400, default value 0:
> +
> + - rxc-skew-psec : Skew control of RX clock pad
> + - txc-skew-psec : Skew control of TX clock pad
> +
> + Range of the value -700 to 800, default value 0:
> +
> + - rxdv-skew-psec : Skew control of RX CTL pad
> + - txen-skew-psec : Skew control of TX CTL pad
> + - rxd0-skew-psec : Skew control of RX data 0 pad
> + - rxd1-skew-psec : Skew control of RX data 1 pad
> + - rxd2-skew-psec : Skew control of RX data 2 pad
> + - rxd3-skew-psec : Skew control of RX data 3 pad
> + - txd0-skew-psec : Skew control of TX data 0 pad
> + - txd1-skew-psec : Skew control of TX data 1 pad
> + - txd2-skew-psec : Skew control of TX data 2 pad
> + - txd3-skew-psec : Skew control of TX data 3 pad
Shouldn't all these use "*-skew-ps" instead of "*-skew-psec", like all
other documented skew properties?
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
