Hello Marcel Ziswiler, > Cleanup mvebu_v7_defconfig and then add support for the Netgear > GS110EMX which is an 8 port Gigabit switch with two additional > Multi-Gig ports. An 88E6390X switch sits at its core connecting to two > 88X3310P 10G PHYs while the control plane is handled by an 88F6811 > Armada 381 SoC. > > Changes in v3: > - Got rid of unused 3.3 volt regulator as suggested by Andrew. > - Got rid of partitioning comment. > - Added switch interrupt GPIO configuration. > > Changes in v2: > - Add Andrew's reviewed-by tag. > - Add Andrew's reviewed-by tag. > - Send previous first patch separately to netdev mailing list as > suggested by Andrew. > - Fix numbering of the PHY labels as suggested by Andrew. > > Marcel Ziswiler (3): > ARM: mvebu_v7_defconfig: enable mtd physmap > ARM: mvebu_v7_defconfig: rebuild default configuration Both applied on mvebu/defconfig > ARM: dts: mvebu: add device tree for netgear gs110emx switch Applied on mvebu/dt Thanks, Gregory > > arch/arm/boot/dts/Makefile | 1 + > .../boot/dts/armada-381-netgear-gs110emx.dts | 295 ++++++++++++++++++ > arch/arm/configs/mvebu_v7_defconfig | 18 +- > 3 files changed, 304 insertions(+), 10 deletions(-) > create mode 100644 arch/arm/boot/dts/armada-381-netgear-gs110emx.dts > > -- > 2.26.2 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- Gregory Clement, Bootlin Embedded Linux and Kernel engineering http://bootlin.com
