From: Alvin Šipraga <alsi@xxxxxxxxxxxxxxx> This series adds support for Realtek's RTL8365MB-VC, a 4+1 port 10/100/1000M Ethernet switch. The driver - rtl8365mb - was developed by Michael Ramussen and myself. This version of the driver is relatively slim, implementing only the standalone port functionality and no offload capabilities. It is based on a previous RFC series [1] from August, and the main difference is the removal of some spurious VLAN operations. Otherwise I have simply addressed most of the feedback. Please see the respective patches for more detail. In parallel I am working on offloading the bridge layer capabilities, but I would like to get the basic stuff upstreamed as soon as possible. [1] https://lore.kernel.org/netdev/20210822193145.1312668-1-alvin@xxxxxxx/ Alvin Šipraga (6): ether: add EtherType for proprietary Realtek protocols net: dsa: move NET_DSA_TAG_RTL4_A to right place in Kconfig/Makefile dt-bindings: net: dsa: realtek-smi: document new compatible rtl8365mb net: dsa: tag_rtl8_4: add realtek 8 byte protocol 4 tag net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC net: phy: realtek: add support for RTL8365MB-VC internal PHYs .../bindings/net/dsa/realtek-smi.txt | 1 + drivers/net/dsa/Kconfig | 1 + drivers/net/dsa/Makefile | 2 +- drivers/net/dsa/realtek-smi-core.c | 4 + drivers/net/dsa/realtek-smi-core.h | 1 + drivers/net/dsa/rtl8365mb.c | 1610 +++++++++++++++++ drivers/net/phy/realtek.c | 8 + include/net/dsa.h | 2 + include/uapi/linux/if_ether.h | 1 + net/dsa/Kconfig | 20 +- net/dsa/Makefile | 3 +- net/dsa/tag_rtl8_4.c | 166 ++ 12 files changed, 1810 insertions(+), 9 deletions(-) create mode 100644 drivers/net/dsa/rtl8365mb.c create mode 100644 net/dsa/tag_rtl8_4.c -- 2.32.0
