On Mon, Oct 11, 2021 at 05:22:15PM +0300, alexandru.tachici@xxxxxxxxxx wrote: > From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx> > > DT bindings for the ADIN1100 10BASE-T1L Ethernet PHY. > > Signed-off-by: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx> > --- > .../devicetree/bindings/net/adi,adin1100.yaml | 30 +++++++++++++++++++ > 1 file changed, 30 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/adi,adin1100.yaml > > diff --git a/Documentation/devicetree/bindings/net/adi,adin1100.yaml b/Documentation/devicetree/bindings/net/adi,adin1100.yaml > new file mode 100644 > index 000000000000..7f98ea8fdf51 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/adi,adin1100.yaml > @@ -0,0 +1,30 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/adi,adin1100.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Analog Devices ADIN1100 PHY > + > +maintainers: > + - Alexandru Tachici <alexandru.tachici@xxxxxxxxxx> > + > +description: > + Bindings for Analog Devices Industrial Low Power 10BASE-T1L Ethernet PHY This schema doesn't do anything. ethernet-phy.yaml is already applied based on the node name and you haven't added any phy specific properties. > + > +allOf: > + - $ref: ethernet-phy.yaml# > + > +examples: > + - | > + ethernet { > + #address-cells = <1>; > + #size-cells = <0>; > + > + 10base-t1l-2.4vpp = <0>; > + > + ethernet-phy@0 { > + compatible = "ethernet-phy-id0283.bc81"; > + reg = <0>; > + }; > + }; > -- > 2.25.1 > >
