From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx> Added BASE-T1 AN advertisement register (Registers 7.514, 7.515, and 7.516) and BASE-T1 AN LP Base Page ability register (Registers 7.517, 7.518, and 7.519). Signed-off-by: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx> --- include/uapi/linux/mdio.h | 40 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) diff --git a/include/uapi/linux/mdio.h b/include/uapi/linux/mdio.h index 8ae82fe3aece..58ac5cdf7eb4 100644 --- a/include/uapi/linux/mdio.h +++ b/include/uapi/linux/mdio.h @@ -67,6 +67,14 @@ #define MDIO_AN_10GBT_STAT 33 /* 10GBASE-T auto-negotiation status */ #define MDIO_PMA_10T1L_STAT 2295 /* 10BASE-T1L PMA status */ #define MDIO_PCS_10T1L_CTRL 2278 /* 10BASE-T1L PCS control */ +#define MDIO_AN_T1_CTRL 512 /* BASE-T1 AN control */ +#define MDIO_AN_T1_STAT 513 /* BASE-T1 AN status */ +#define MDIO_AN_T1_ADV_L 514 /* BASE-T1 AN advertisement register [15:0] */ +#define MDIO_AN_T1_ADV_M 515 /* BASE-T1 AN advertisement register [31:16] */ +#define MDIO_AN_T1_ADV_H 516 /* BASE-T1 AN advertisement register [47:32] */ +#define MDIO_AN_T1_LP_L 517 /* BASE-T1 AN LP's base page register [15:0] */ +#define MDIO_AN_T1_LP_M 518 /* BASE-T1 AN LP's base page register [31:16] */ +#define MDIO_AN_T1_LP_H 519 /* BASE-T1 AN LP's base page register [47:32] */ /* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */ #define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */ @@ -278,6 +286,38 @@ #define MDIO_PCS_10T1L_CTRL_LB 0x4000 /* Enable PCS level loopback mode */ #define MDIO_PCS_10T1L_CTRL_RESET 0x8000 /* PCS reset */ +/* BASE-T1 auto-negotiation advertisement register [15:0] */ +#define MDIO_AN_T1_ADV_L_PAUSE_CAP ADVERTISE_PAUSE_CAP +#define MDIO_AN_T1_ADV_L_PAUSE_ASYM ADVERTISE_PAUSE_ASYM +#define MDIO_AN_T1_ADV_L_FORCE_MS 0x1000 /* Force Master/slave Configuration */ +#define MDIO_AN_T1_ADV_L_REMOTE_FAULT ADVERTISE_RFAULT +#define MDIO_AN_T1_ADV_L_ACK ADVERTISE_LPACK +#define MDIO_AN_T1_ADV_L_NEXT_PAGE_REQ ADVERTISE_NPAGE + +/* BASE-T1 auto-negotiation advertisement register [31:16] */ +#define MDIO_AN_T1_ADV_M_B10L 0x4000 /* device is compatible with 10BASE-T1L */ +#define MDIO_AN_T1_ADV_M_MST 0x0010 /* advertise master preference */ + +/* BASE-T1 auto-negotiation advertisement register [47:32] */ +#define MDIO_AN_T1_ADV_H_10L_TX_HI_REQ 0x1000 /* 10BASE-T1L High Level Transmit Request */ +#define MDIO_AN_T1_ADV_H_10L_TX_HI 0x2000 /* 10BASE-T1L High Level Transmit Ability */ + +/* BASE-T1 AN LP's base page register [15:0] */ +#define MDIO_AN_T1_LP_L_PAUSE_CAP LPA_PAUSE_CAP +#define MDIO_AN_T1_LP_L_PAUSE_ASYM LPA_PAUSE_ASYM +#define MDIO_AN_T1_LP_L_FORCE_MS 0x1000 /* LP Force Master/slave Configuration */ +#define MDIO_AN_T1_LP_L_REMOTE_FAULT LPA_RFAULT +#define MDIO_AN_T1_LP_L_ACK LPA_LPACK +#define MDIO_AN_T1_LP_L_NEXT_PAGE_REQ LPA_NPAGE + +/* BASE-T1 AN LP's base page register [31:16] */ +#define MDIO_AN_T1_LP_M_MST 0x0080 /* LP master preference */ +#define MDIO_AN_T1_LP_M_B10L 0x4000 /* LP is compatible with 10BASE-T1L */ + +/* BASE-T1 AN LP's base page register [47:32] */ +#define MDIO_AN_T1_LP_H_10L_TX_HI_REQ 0x1000 /* 10BASE-T1L High Level LP Transmit Request */ +#define MDIO_AN_T1_LP_H_10L_TX_HI 0x2000 /* 10BASE-T1L High Level LP Transmit Ability */ + /* EEE Supported/Advertisement/LP Advertisement registers. * * EEE capability Register (3.20), Advertisement (7.60) and -- 2.25.1
