Convert the NXP PN532 NFC controller to DT schema format. Drop the "clock-frequency" property during conversion because it is a property of I2C bus controller, not I2C slave device. It was also never used by the driver. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx> --- .../bindings/net/nfc/nxp,pn532.yaml | 65 +++++++++++++++++++ .../devicetree/bindings/net/nfc/pn532.txt | 46 ------------- 2 files changed, 65 insertions(+), 46 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml delete mode 100644 Documentation/devicetree/bindings/net/nfc/pn532.txt diff --git a/Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml b/Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml new file mode 100644 index 000000000000..d8ba5a18db98 --- /dev/null +++ b/Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/nfc/nxp,pn532.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP Semiconductors PN532 NFC controller + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx> + +properties: + compatible: + oneOf: + - const: nxp,pn532 + - description: Deprecated bindings + enum: + - nxp,pn532-i2c + - nxp,pn533-i2c + deprecated: true + + interrupts: + description: Required if connected via I2C + maxItems: 1 + + reg: + description: Required if connected via I2C + maxItems: 1 + +required: + - compatible + +dependencies: + interrupts: [ 'reg' ] + +additionalProperties: false + +examples: + # PN532 on I2C bus + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + nfc@24 { + compatible = "nxp,pn532"; + + reg = <0x24>; + + interrupt-parent = <&gpio1>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + # PN532 connected via UART + - | + serial@49042000 { + reg = <0x49042000 0x400>; + + nfc { + compatible = "nxp,pn532"; + }; + }; diff --git a/Documentation/devicetree/bindings/net/nfc/pn532.txt b/Documentation/devicetree/bindings/net/nfc/pn532.txt deleted file mode 100644 index a5507dc499bc..000000000000 --- a/Documentation/devicetree/bindings/net/nfc/pn532.txt +++ /dev/null @@ -1,46 +0,0 @@ -* NXP Semiconductors PN532 NFC Controller - -Required properties: -- compatible: Should be - - "nxp,pn532" Place a node with this inside the devicetree node of the bus - where the NFC chip is connected to. - Currently the kernel has phy bindings for uart and i2c. - - "nxp,pn532-i2c" (DEPRECATED) only works for the i2c binding. - - "nxp,pn533-i2c" (DEPRECATED) only works for the i2c binding. - -Required properties if connected on i2c: -- clock-frequency: I²C work frequency. -- reg: for the I²C bus address. This is fixed at 0x24 for the PN532. -- interrupts: GPIO interrupt to which the chip is connected - -Optional SoC Specific Properties: -- pinctrl-names: Contains only one value - "default". -- pintctrl-0: Specifies the pin control groups used for this controller. - -Example (for ARM-based BeagleBone with PN532 on I2C2): - -&i2c2 { - - - pn532: nfc@24 { - - compatible = "nxp,pn532"; - - reg = <0x24>; - clock-frequency = <400000>; - - interrupt-parent = <&gpio1>; - interrupts = <17 IRQ_TYPE_EDGE_FALLING>; - - }; -}; - -Example (for PN532 connected via uart): - -uart4: serial@49042000 { - compatible = "ti,omap3-uart"; - - pn532: nfc { - compatible = "nxp,pn532"; - }; -}; -- 2.30.2
