Add names and decriptions of additional PORT0_PAD_CTRL properties. Document new binding qca,mac6_exchange that exchange the mac0 port with mac6. qca,sgmii-(rx|tx)clk-falling-edge are for setting the respective clock phase to failling edge. Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx> Signed-off-by: Matthew Hagan <mnhagan88@xxxxxxxxx> --- Documentation/devicetree/bindings/net/dsa/qca8k.txt | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt b/Documentation/devicetree/bindings/net/dsa/qca8k.txt index 1f6b7d2f609e..780d1e60c425 100644 --- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt @@ -13,6 +13,9 @@ Required properties: Optional properties: - reset-gpios: GPIO to be used to reset the whole device +- qca,mac6-exchange: Internally swap MAC0 and MAC6. +- qca,sgmii-rxclk-falling-edge: Set the receive clock phase to falling edge. +- qca,sgmii-txclk-falling-edge: Set the transmit clock phase to falling edge. - qca,rgmii0-1-8v: Set the internal regulator to supply 1.8v for MAC0 port - qca,rgmii56-1-8v: Set the internal regulator to supply 1.8v for MAC5/6 port -- 2.32.0
