On Wed, 6 Oct 2021 at 15:38, Krzysztof Kozlowski
<krzysztof.kozlowski@xxxxxxxxxxxxx> wrote:
>
> On 06/10/2021 12:46, Sam Protsenko wrote:
> > On Wed, 15 Sept 2021 at 11:21, Krzysztof Kozlowski
> > <krzysztof.kozlowski@xxxxxxxxxxxxx> wrote:
> >>
> >> On 14/09/2021 17:56, Sam Protsenko wrote:
> >>> By default if bus clock has no users its "enable count" value is 0. It
> >>> might be actually running if it's already enabled in bootloader, but
> >>> then in some cases it can be disabled by mistake. For example, such case
> >>> was observed when dw_mci_probe() enabled bus clock, then failed to do
> >>> something and disabled that bus clock on error path. After that even
> >>> attempt to read the 'clk_summary' file in DebugFS freezed forever, as
> >>> CMU bus clock ended up being disabled and it wasn't possible to access
> >>> CMU registers anymore.
> >>>
> >>> To avoid such cases, CMU driver must increment the ref count for that
> >>> bus clock by running clk_prepare_enable(). There is already existing
> >>> '.clk_name' field in struct samsung_cmu_info, exactly for that reason.
> >>> It was added in commit 523d3de41f02 ("clk: samsung: exynos5433: Add
> >>> support for runtime PM"). But the clock is actually enabled only in
> >>> Exynos5433 clock driver. Let's mimic what is done there in generic
> >>> samsung_cmu_register_one() function, so other drivers can benefit from
> >>> that `.clk_name' field. As was described above, it might be helpful not
> >>> only for PM reasons, but also to prevent possible erroneous clock gating
> >>> on error paths.
> >>>
> >>> Another way to workaround that issue would be to use CLOCK_IS_CRITICAL
> >>> flag for corresponding gate clocks. But that might be not very good
> >>> design decision, as we might still want to disable that bus clock, e.g.
> >>> on PM suspend.
> >>>
> >>> Signed-off-by: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
> >>> ---
> >>> drivers/clk/samsung/clk.c | 13 +++++++++++++
> >>> 1 file changed, 13 insertions(+)
> >>>
> >>> diff --git a/drivers/clk/samsung/clk.c b/drivers/clk/samsung/clk.c
> >>> index 1949ae7851b2..da65149fa502 100644
> >>> --- a/drivers/clk/samsung/clk.c
> >>> +++ b/drivers/clk/samsung/clk.c
> >>> @@ -357,6 +357,19 @@ struct samsung_clk_provider * __init samsung_cmu_register_one(
> >>>
> >>> ctx = samsung_clk_init(np, reg_base, cmu->nr_clk_ids);
> >>>
> >>> + /* Keep bus clock running, so it's possible to access CMU registers */
> >>> + if (cmu->clk_name) {
> >>> + struct clk *bus_clk;
> >>> +
> >>> + bus_clk = __clk_lookup(cmu->clk_name);
> >>> + if (bus_clk) {
> >>> + clk_prepare_enable(bus_clk);
> >>> + } else {
> >>> + pr_err("%s: could not find bus clock %s\n", __func__,
> >>> + cmu->clk_name);
> >>> + }
> >>> + }
> >>> +
> >>
> >> Solving this problem in generic way makes sense but your solution is
> >> insufficient. You skipped suspend/resume paths and in such case you
> >> should remove the Exynos5433-specific code.
> >>
> >
> > Keeping core bus clocks always running seems like a separate
> > independent feature to me (not related to suspend/resume). It's
> > mentioned in commit 523d3de41f02 ("clk: samsung: exynos5433: Add
> > support for runtime PM") this way:
> >
> > "Also for each CMU there is one special parent clock, which has to
> > be enabled all the time when any access to CMU registers is being
> > done."
> >
> > Why do you think suspend/resume paths have to be implemented along
> > with it? Btw, I didn't add PM ops in clk-exynos850, as PM is not
> > implemented on my board yet and I can't test it.
>
> You can skip the runtime PM, so keep your patch almost like it is now
> (in respect to Sylwester's comment about __clk_lookup). However now the
> Exynos5433 will enable the clk_name twice: here and in
> exynos5433_cmu_probe().
>
> If you keep this approach, you need to remove duplicated part in
> exynos5433_cmu_probe()...
>
My patch is only touching samsung_cmu_register_one(), and
exynos5433_cmu_probe() doesn't call samsung_cmu_register_one(). So I
don't think there can be a problem there. Or I'm missing something?
samsung_cmu_register_one() is actually called from 5433 clk driver,
but only from CMUs registered with CLK_OF_DECLARE(), and those are not
setting .clk_name field, so my code is not affecting those either.
Real problem I can see is that I can't avoid using __clk_lookup() if I
implement that code in samsung_cmu_register_one(). Tried to do use
clk_get(NULL, ...) instead, but it doesn't work with 1st param (dev)
being NULL, because samsung_clk_register_*() functions don't register
clkdev (only samsung_clk_register_fixed_rate() does), hence
LIST_HEAD(clocks) is empty in clkdev.c, and clk_get() fails, when not
provided with actual 'dev' param, which in turn is not present in
samsung_cmu_register_one()...
About using platform_driver: as I can see from clk-exynos5433.c, only
CMUs which belong to Power Domains are registered as platform_driver.
Rest of CMUs are registered using CLK_OF_DECLARE(), thus they don't
get platform_device param. That makes it harder to avoid using
__clk_lookup() inside samsung_cmu_register_one().
All that said, I feel like correct way to implement this patch would be:
1. Register all PD-capable CMUs as platform_driver in clk-exynos850
(all CMUs except CMU_TOP)
2. Move bus clock enablement code from samsung_cmu_register_one() to
corresponding clk-exynos850 probe function
This way I would be able to use clk_get(dev, ...) instead of
__clk_lookup(), and that won't affect any existing code for sure. Code
will be more unified w.r.t. how it's done in clk-exynos5433, and
platform_device will be a foundation for implementing PM ops later.
Taking into account how much design decisions should be done for using
that in common code -- I'd say let's do that later, as a separate
refactoring activity.
Do you think that makes sense?
Thanks!
> >
> > If you are suggesting moving all stuff from exynos5433_cmu_probe()
> > into samsung_cmu_register_one(), it would take passing platform_device
> > there, and implementing all PM related operations. I guess it's not a
> > super easy task, as it would require converting clk-exynos7 to
> > platform_driver for instance, and re-testing everything on exynos5433
> > and exynos7 boards (which I don't have).
> >
> > What do you say if I pull that code to clk-exynos850.c instead for v2?
> > Refactoring (merging stuff from exynos5433_cmu_probe() into
> > samsung_cmu_register_one() ) can be done later, when I add PM ops into
> > clk-exynos850.
> >
> >> Best regards,
> >> Krzysztof
>
>
> Best regards,
> Krzysztof
