Am Dienstag, dem 05.10.2021 um 19:05 -0500 schrieb Adam Ford:
> This adds the description for the i.MX8MN disp blk-ctrl.
>
> Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
> ---
> drivers/soc/imx/imx8m-blk-ctrl.c | 70 ++++++++++++++++++++++++++++++++
> 1 file changed, 70 insertions(+)
>
> diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c
> index e172d295c441..8fcd5ed62f50 100644
> --- a/drivers/soc/imx/imx8m-blk-ctrl.c
> +++ b/drivers/soc/imx/imx8m-blk-ctrl.c
> @@ -14,6 +14,7 @@
> #include <linux/clk.h>
>
> #include <dt-bindings/power/imx8mm-power.h>
> +#include <dt-bindings/power/imx8mn-power.h>
>
> #define BLK_SFT_RSTN 0x0
> #define BLK_CLK_EN 0x4
> @@ -498,6 +499,75 @@ static const struct imx8m_blk_ctrl_data imx8mm_disp_blk_ctl_dev_data = {
> .num_domains = ARRAY_SIZE(imx8mm_disp_blk_ctl_domain_data),
> };
>
> +
> +static int imx8mn_disp_power_notifier(struct notifier_block *nb,
> + unsigned long action, void *data)
> +{
> + struct imx8m_blk_ctrl *bc = container_of(nb, struct imx8m_blk_ctrl,
> + power_nb);
> +
> + if (action != GENPD_NOTIFY_ON && action != GENPD_NOTIFY_PRE_OFF)
> + return NOTIFY_OK;
> +
> + /* Enable bus clock and deassert bus reset */
> + regmap_set_bits(bc->regmap, BLK_CLK_EN, BIT(8));
> + regmap_set_bits(bc->regmap, BLK_SFT_RSTN, BIT(8));
> +
> + /*
> + * On power up we have no software backchannel to the GPC to
> + * wait for the ADB handshake to happen, so we just delay for a
> + * bit. On power down the GPC driver waits for the handshake.
> + */
> + if (action == GENPD_NOTIFY_ON)
> + udelay(5);
> +
> +
> + return NOTIFY_OK;
> +}
> +
> +static const struct imx8m_blk_ctrl_domain_data imx8mn_disp_blk_ctl_domain_data[] = {
> + [IMX8MN_DISPBLK_PD_MIPI_DSI] = {
> + .name = "dispblk-mipi-dsi",
> + .clk_names = (const char *[]){ "dsi-pclk", "dsi-ref", },
> + .num_clks = 2,
> + .gpc_name = "mipi-dsi",
> + .rst_mask = BIT(0) | BIT(1),
> + .clk_mask = BIT(0) | BIT(1),
> + },
> + [IMX8MN_DISPBLK_PD_MIPI_CSI] = {
> + .name = "dispblk-mipi-csi",
> + .clk_names = (const char *[]){ "csi-aclk", "csi-pclk" },
> + .num_clks = 2,
> + .gpc_name = "mipi-csi",
> + .rst_mask = BIT(2) | BIT(3),
> + .clk_mask = BIT(2) | BIT(3),
> + },
> + [IMX8MN_DISPBLK_PD_LCDIF] = {
> + .name = "dispblk-lcdif",
> + .clk_names = (const char *[]){ "lcdif-axi", "lcdif-apb", "lcdif-pix", },
> + .num_clks = 3,
> + .gpc_name = "lcdif",
> + .rst_mask = BIT(4) | BIT(5),
> + .clk_mask = BIT(4) | BIT(5),
> + },
> + [IMX8MN_DISPBLK_PD_ISI] = {
> + .name = "dispblk-isi",
> + .clk_names = (const char *[]){ "disp_axi", "disp_apb", "disp_axi_root",
> + "disp_apb_root"},
> + .num_clks = 2,
I think those are wrong. At least the num_clks and the number of clock
names is inconsistent.
> + .gpc_name = "isi",
> + .rst_mask = BIT(6) | BIT(7),
> + .clk_mask = BIT(6) | BIT(7),
> + },
> +};
> +
> +static const struct imx8m_blk_ctrl_data imx8mn_disp_blk_ctl_dev_data = {
> + .max_reg = 0x84,
> + .power_notifier_fn = imx8mn_disp_power_notifier,
> + .domains = imx8mn_disp_blk_ctl_domain_data,
> + .num_domains = ARRAY_SIZE(imx8mn_disp_blk_ctl_domain_data),
> +};
> +
You need to hook this up in imx8m_blk_ctrl_of_match, otherwise this is
all just dead code.
Regards,
Lucas
> static const struct of_device_id imx8m_blk_ctrl_of_match[] = {
> {
> .compatible = "fsl,imx8mm-vpu-blk-ctrl",
