Re: [PATCH v5 00/18] i.MX8MM GPC improvements and BLK_CTRL driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Oct 02, 2021 at 02:59:36AM +0200, Lucas Stach wrote:
> Hi all,
> 
> just another respin, with the struct naming issues reported by Adam
> fixed and acks and reviews applied to the DT binding patches.
> 
> Regards,
> Lucas
> 
> Frieder Schrempf (1):
>   arm64: dts: imx8mm: Add GPU nodes for 2D and 3D core
> 
> Lucas Stach (15):
>   Revert "soc: imx: gpcv2: move reset assert after requesting domain
>     power up"
>   soc: imx: gpcv2: add lockdep annotation
>   soc: imx: gpcv2: add domain option to keep domain clocks enabled
>   soc: imx: gpcv2: keep i.MX8M* bus clocks enabled
>   soc: imx: gpcv2: support system suspend/resume
>   dt-bindings: soc: add binding for i.MX8MM VPU blk-ctrl
>   dt-bindings: power: imx8mm: add defines for VPU blk-ctrl domains
>   soc: imx: add i.MX8M blk-ctrl driver
>   dt-bindings: soc: add binding for i.MX8MM DISP blk-ctrl
>   dt-bindings: power: imx8mm: add defines for DISP blk-ctrl domains
>   soc: imx: imx8m-blk-ctrl: add DISP blk-ctrl
>   arm64: dts: imx8mm: add GPC node
>   arm64: dts: imx8mm: put USB controllers into power-domains
>   arm64: dts: imx8mm: add VPU blk-ctrl
>   arm64: dts: imx8mm: add DISP blk-ctrl

Applied all, thanks!

> 
> Marek Vasut (2):
>   soc: imx: gpcv2: Turn domain->pgc into bitfield
>   soc: imx: gpcv2: Set both GPC_PGC_nCTRL(GPU_2D|GPU_3D) for MX8MM GPU
>     domain

These two were already picked up separately.

Shawn



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux