Hi all,
just another respin, with the struct naming issues reported by Adam
fixed and acks and reviews applied to the DT binding patches.
Regards,
Lucas
Frieder Schrempf (1):
arm64: dts: imx8mm: Add GPU nodes for 2D and 3D core
Lucas Stach (15):
Revert "soc: imx: gpcv2: move reset assert after requesting domain
power up"
soc: imx: gpcv2: add lockdep annotation
soc: imx: gpcv2: add domain option to keep domain clocks enabled
soc: imx: gpcv2: keep i.MX8M* bus clocks enabled
soc: imx: gpcv2: support system suspend/resume
dt-bindings: soc: add binding for i.MX8MM VPU blk-ctrl
dt-bindings: power: imx8mm: add defines for VPU blk-ctrl domains
soc: imx: add i.MX8M blk-ctrl driver
dt-bindings: soc: add binding for i.MX8MM DISP blk-ctrl
dt-bindings: power: imx8mm: add defines for DISP blk-ctrl domains
soc: imx: imx8m-blk-ctrl: add DISP blk-ctrl
arm64: dts: imx8mm: add GPC node
arm64: dts: imx8mm: put USB controllers into power-domains
arm64: dts: imx8mm: add VPU blk-ctrl
arm64: dts: imx8mm: add DISP blk-ctrl
Marek Vasut (2):
soc: imx: gpcv2: Turn domain->pgc into bitfield
soc: imx: gpcv2: Set both GPC_PGC_nCTRL(GPU_2D|GPU_3D) for MX8MM GPU
domain
.../soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml | 94 ++++
.../soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml | 76 +++
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 180 ++++++
drivers/soc/imx/Makefile | 1 +
drivers/soc/imx/gpcv2.c | 131 +++--
drivers/soc/imx/imx8m-blk-ctrl.c | 523 ++++++++++++++++++
include/dt-bindings/power/imx8mm-power.h | 9 +
7 files changed, 973 insertions(+), 41 deletions(-)
create mode 100644 Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml
create mode 100644 Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml
create mode 100644 drivers/soc/imx/imx8m-blk-ctrl.c
--
2.30.2
