On 03/10/2021 03:32, Dmitry Osipenko wrote:
> Asus Transformer TF101 doesn't provide RAM code and in this case memory
> timings should be selected based on identity information read out from
> SDRAM chip. Support matching timings by LPDDR2 configuration.
>
> Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
> ---
> drivers/memory/tegra/Kconfig | 1 +
> drivers/memory/tegra/tegra20-emc.c | 191 +++++++++++++++++++++++++++--
> 2 files changed, 179 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/memory/tegra/Kconfig b/drivers/memory/tegra/Kconfig
> index f9bae36c03a3..7951764b4efe 100644
> --- a/drivers/memory/tegra/Kconfig
> +++ b/drivers/memory/tegra/Kconfig
> @@ -16,6 +16,7 @@ config TEGRA20_EMC
> depends on ARCH_TEGRA_2x_SOC || COMPILE_TEST
> select DEVFREQ_GOV_SIMPLE_ONDEMAND
> select PM_DEVFREQ
> + select DDR
> help
> This driver is for the External Memory Controller (EMC) found on
> Tegra20 chips. The EMC controls the external DRAM on the board.
> diff --git a/drivers/memory/tegra/tegra20-emc.c b/drivers/memory/tegra/tegra20-emc.c
> index c3462dbc8c22..8965cdff43b9 100644
> --- a/drivers/memory/tegra/tegra20-emc.c
> +++ b/drivers/memory/tegra/tegra20-emc.c
> @@ -5,6 +5,7 @@
> * Author: Dmitry Osipenko <digetx@xxxxxxxxx>
> */
>
> +#include <linux/bitfield.h>
> #include <linux/clk.h>
> #include <linux/clk/tegra.h>
> #include <linux/debugfs.h>
> @@ -27,11 +28,15 @@
> #include <soc/tegra/common.h>
> #include <soc/tegra/fuse.h>
>
> +#include "../jedec_ddr.h"
> +#include "../of_memory.h"
> +
> #include "mc.h"
>
> #define EMC_INTSTATUS 0x000
> #define EMC_INTMASK 0x004
> #define EMC_DBG 0x008
> +#define EMC_ADR_CFG_0 0x010
> #define EMC_TIMING_CONTROL 0x028
> #define EMC_RC 0x02c
> #define EMC_RFC 0x030
> @@ -68,6 +73,7 @@
> #define EMC_QUSE_EXTRA 0x0ac
> #define EMC_ODT_WRITE 0x0b0
> #define EMC_ODT_READ 0x0b4
> +#define EMC_MRR 0x0ec
> #define EMC_FBIO_CFG5 0x104
> #define EMC_FBIO_CFG6 0x114
> #define EMC_STAT_CONTROL 0x160
> @@ -94,6 +100,7 @@
>
> #define EMC_REFRESH_OVERFLOW_INT BIT(3)
> #define EMC_CLKCHANGE_COMPLETE_INT BIT(4)
> +#define EMC_MRR_DIVLD_INT BIT(5)
>
> #define EMC_DBG_READ_MUX_ASSEMBLY BIT(0)
> #define EMC_DBG_WRITE_MUX_ACTIVE BIT(1)
> @@ -102,11 +109,25 @@
> #define EMC_DBG_CFG_PRIORITY BIT(24)
>
> #define EMC_FBIO_CFG5_DRAM_WIDTH_X16 BIT(4)
> +#define EMC_FBIO_CFG5_DRAM_TYPE GENMASK(1, 0)
> +
> +#define EMC_MRR_DEV_SELECTN GENMASK(31, 30)
> +#define EMC_MRR_MRR_MA GENMASK(23, 16)
> +#define EMC_MRR_MRR_DATA GENMASK(15, 0)
> +
> +#define EMC_ADR_CFG_0_EMEM_NUMDEV GENMASK(25, 24)
>
> #define EMC_PWR_GATHER_CLEAR (1 << 8)
> #define EMC_PWR_GATHER_DISABLE (2 << 8)
> #define EMC_PWR_GATHER_ENABLE (3 << 8)
>
> +enum emc_dram_type {
> + DRAM_TYPE_RESERVED,
> + DRAM_TYPE_DDR1,
> + DRAM_TYPE_LPDDR2,
> + DRAM_TYPE_DDR2,
> +};
> +
> static const u16 emc_timing_registers[] = {
> EMC_RC,
> EMC_RFC,
> @@ -201,6 +222,12 @@ struct tegra_emc {
> struct mutex rate_lock;
>
> struct devfreq_simple_ondemand_data ondemand_data;
> +
> + /* memory chip identity information */
> + union lpddr2_basic_config4 basic_conf4;
> + unsigned int manufacturer_id;
> + unsigned int revision_id1;
> + unsigned int revision_id2;
> };
>
> static irqreturn_t tegra_emc_isr(int irq, void *data)
> @@ -401,6 +428,9 @@ static int tegra_emc_load_timings_from_dt(struct tegra_emc *emc,
> timing = emc->timings;
>
> for_each_child_of_node(node, child) {
> + if (of_node_name_eq(child, "lpddr2-configuration"))
> + continue;
> +
> err = load_one_timing_from_dt(emc, timing++, child);
> if (err) {
> of_node_put(child);
> @@ -422,8 +452,9 @@ static int tegra_emc_load_timings_from_dt(struct tegra_emc *emc,
> }
>
> static struct device_node *
> -tegra_emc_find_node_by_ram_code(struct device *dev)
> +tegra_emc_find_node_by_ram_code(struct tegra_emc *emc)
> {
> + struct device *dev = emc->dev;
> struct device_node *np;
> u32 value, ram_code;
> int err;
> @@ -442,8 +473,53 @@ tegra_emc_find_node_by_ram_code(struct device *dev)
> np = of_find_node_by_name(np, "emc-tables")) {
> err = of_property_read_u32(np, "nvidia,ram-code", &value);
> if (err || value != ram_code) {
> - of_node_put(np);
> - continue;
> + struct device_node *lpddr2_np;
> + bool conf_mismatches = false;
> +
> + lpddr2_np = of_find_node_by_name(np, "lpddr2-configuration");
> + if (lpddr2_np) {
> + struct lpddr2_configuration cfg;
> +
> + err = of_lpddr2_get_config(lpddr2_np, &cfg);
> + if (!err) {
> + if (cfg.manufacturer_id >= 0 &&
> + cfg.manufacturer_id != emc->manufacturer_id)
> + conf_mismatches = true;
> +
> + if (cfg.revision_id1 >= 0 &&
> + cfg.revision_id1 != emc->revision_id1)
> + conf_mismatches = true;
> +
> + if (cfg.revision_id2 >= 0 &&
> + cfg.revision_id2 != emc->revision_id2)
> + conf_mismatches = true;
> +
> + if (cfg.density >= 0 &&
> + cfg.density != 64 << emc->basic_conf4.density)
> + conf_mismatches = true;
> +
> + if (cfg.io_width >= 0 &&
> + cfg.io_width != 32 >> emc->basic_conf4.io_width)
> + conf_mismatches = true;
> +
> + if (cfg.arch_type >= 0 &&
> + cfg.arch_type != emc->basic_conf4.arch_type)
> + conf_mismatches = true;
> + } else {
> + dev_err(emc->dev, "failed to parse %pOF: %d\n",
> + lpddr2_np, err);
> + conf_mismatches = true;
> + }
> +
> + of_node_put(lpddr2_np);
> + } else {
> + conf_mismatches = true;
> + }
> +
> + if (conf_mismatches) {
> + of_node_put(np);
> + continue;
> + }
> }
>
> return np;
> @@ -455,10 +531,70 @@ tegra_emc_find_node_by_ram_code(struct device *dev)
> return NULL;
> }
>
> +static int emc_read_lpddr_mode_register(struct tegra_emc *emc,
> + unsigned int emem_dev,
> + unsigned int register_addr,
> + unsigned int *register_data)
> +{
> + u32 val, memory_dev = emem_dev + 1, mr_mask = 0xff;
One initialization per line, in reversed christmas tree (which matches
rest of the file, I thnk).
> + int err;
> +
> + /* clear data-valid interrupt status */
> + writel_relaxed(EMC_MRR_DIVLD_INT, emc->regs + EMC_INTSTATUS);
> +
> + /* issue mode register read request */
> + val = FIELD_PREP(EMC_MRR_DEV_SELECTN, memory_dev);
> + val |= FIELD_PREP(EMC_MRR_MRR_MA, register_addr);
> +
> + writel_relaxed(val, emc->regs + EMC_MRR);
> +
> + /* wait for the LPDDR2 data-valid interrupt */
> + err = readl_relaxed_poll_timeout_atomic(emc->regs + EMC_INTSTATUS, val,
> + val & EMC_MRR_DIVLD_INT,
> + 1, 100);
> + if (err) {
> + dev_err(emc->dev, "mode-register %u read failed: %d\n",
> + register_addr, err);
> + return err;
> + }
> +
> + /* read out register data */
> + val = readl_relaxed(emc->regs + EMC_MRR);
> + *register_data = FIELD_GET(EMC_MRR_MRR_DATA, val) & mr_mask;
> +
> + return 0;
> +}
> +
> +static void emc_read_lpddr_sdram_info(struct tegra_emc *emc,
> + unsigned int emem_dev,
> + bool print_out)
> +{
> + /* these registers are standard for all LPDDR JEDEC memory chips */
> + emc_read_lpddr_mode_register(emc, emem_dev, 5, &emc->manufacturer_id);
> + emc_read_lpddr_mode_register(emc, emem_dev, 6, &emc->revision_id1);
> + emc_read_lpddr_mode_register(emc, emem_dev, 7, &emc->revision_id2);
> + emc_read_lpddr_mode_register(emc, emem_dev, 8, &emc->basic_conf4.value);
You ignore the return codes but you should not try to load timings in
such case. The DT could (by mistake or on purpose) have values '0' for
the fields you compare.
> +
> + if (!print_out)
> + return;
> +
> + dev_info(emc->dev, "SDRAM[dev%u]: manufacturer: 0x%x (%s) rev1: 0x%x rev2: 0x%x prefetch: S%u density: %uMbit iowidth: %ubit\n",
> + emem_dev, emc->manufacturer_id,
> + lpddr2_jedec_manufacturer(emc->manufacturer_id),
> + emc->revision_id1, emc->revision_id2,
> + 4 >> emc->basic_conf4.arch_type,
> + 64 << emc->basic_conf4.density,
> + 32 >> emc->basic_conf4.io_width);
> +}
> +
> static int emc_setup_hw(struct tegra_emc *emc)
> {
> + u32 emc_cfg, emc_dbg, emc_fbio, emc_adr_cfg;
> u32 intmask = EMC_REFRESH_OVERFLOW_INT;
> - u32 emc_cfg, emc_dbg, emc_fbio;
> + static bool print_sdram_info_once;
How about moving print_sdram_info_once to emc_read_lpddr_sdram_info()?
Less code here.
> + enum emc_dram_type dram_type;
> + const char *dram_type_str;
> + unsigned int emem_numdev;
>
> emc_cfg = readl_relaxed(emc->regs + EMC_CFG_2);
>
> @@ -496,7 +632,36 @@ static int emc_setup_hw(struct tegra_emc *emc)
> else
> emc->dram_bus_width = 32;
>
Best regards,
Krzysztof
