Re: [PATCH v7 08/24] wfx: add bus_sdio.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 30 Sept 2021 at 18:51, Jérôme Pouiller
<jerome.pouiller@xxxxxxxxxx> wrote:
>
> Hello Ulf,
>
> On Thursday 30 September 2021 12:07:55 CEST Ulf Hansson wrote:
> > On Mon, 20 Sept 2021 at 18:12, Jerome Pouiller
> > <Jerome.Pouiller@xxxxxxxxxx> wrote:
> > >
> > > From: Jérôme Pouiller <jerome.pouiller@xxxxxxxxxx>
> > >
> > > Signed-off-by: Jérôme Pouiller <jerome.pouiller@xxxxxxxxxx>
> > > ---
> > >  drivers/net/wireless/silabs/wfx/bus_sdio.c | 261 +++++++++++++++++++++
> > >  1 file changed, 261 insertions(+)
> > >  create mode 100644 drivers/net/wireless/silabs/wfx/bus_sdio.c
> > >
> > > diff --git a/drivers/net/wireless/silabs/wfx/bus_sdio.c b/drivers/net/wireless/silabs/wfx/bus_sdio.c
> >
> > [...]
> >
> > > +
> > > +static int wfx_sdio_probe(struct sdio_func *func,
> > > +                         const struct sdio_device_id *id)
> > > +{
> > > +       struct device_node *np = func->dev.of_node;
> > > +       struct wfx_sdio_priv *bus;
> > > +       int ret;
> > > +
> > > +       if (func->num != 1) {
> > > +               dev_err(&func->dev, "SDIO function number is %d while it should always be 1 (unsupported chip?)\n",
> > > +                       func->num);
> > > +               return -ENODEV;
> > > +       }
> > > +
> > > +       bus = devm_kzalloc(&func->dev, sizeof(*bus), GFP_KERNEL);
> > > +       if (!bus)
> > > +               return -ENOMEM;
> > > +
> > > +       if (!np || !of_match_node(wfx_sdio_of_match, np)) {
> > > +               dev_warn(&func->dev, "no compatible device found in DT\n");
> > > +               return -ENODEV;
> > > +       }
> > > +
> > > +       bus->func = func;
> > > +       bus->of_irq = irq_of_parse_and_map(np, 0);
> > > +       sdio_set_drvdata(func, bus);
> > > +       func->card->quirks |= MMC_QUIRK_LENIENT_FN0 |
> > > +                             MMC_QUIRK_BLKSZ_FOR_BYTE_MODE |
> > > +                             MMC_QUIRK_BROKEN_BYTE_MODE_512;
> >
> > I would rather see that you add an SDIO_FIXUP for the SDIO card, to
> > the sdio_fixup_methods[], in drivers/mmc/core/quirks.h, instead of
> > this.
>
> In the current patch, these quirks are applied only if the device appears
> in the device tree (see the condition above). If I implement them in
> drivers/mmc/core/quirks.h they will be applied as soon as the device is
> detected. Is it what we want?
>
> Note: we already have had a discussion about the strange VID/PID declared
> by this device:
>   https://www.spinics.net/lists/netdev/msg692577.html

Please, see my other reply to Pali.

>
>
> [...]
> > > +
> > > +static const struct sdio_device_id wfx_sdio_ids[] = {
> > > +       { SDIO_DEVICE(SDIO_VENDOR_ID_SILABS, SDIO_DEVICE_ID_SILABS_WF200) },
> > > +       { },
> > > +};
> > > +MODULE_DEVICE_TABLE(sdio, wfx_sdio_ids);
> > > +
> > > +struct sdio_driver wfx_sdio_driver = {
> > > +       .name = "wfx-sdio",
> > > +       .id_table = wfx_sdio_ids,
> > > +       .probe = wfx_sdio_probe,
> > > +       .remove = wfx_sdio_remove,
> > > +       .drv = {
> > > +               .owner = THIS_MODULE,
> > > +               .of_match_table = wfx_sdio_of_match,
> >
> > Is there no power management? Or do you intend to add that on top?
>
> It seems we already have had this discussion:
>
>   https://lore.kernel.org/netdev/CAPDyKFqJf=vUqpQg3suDCadKrFTkQWFTY_qp=+yDK=_Lu9gJGg@xxxxxxxxxxxxxx/#r
>
> In this thread, Kalle said:
> > Many mac80211 drivers do so that the device is powered off during
> > interface down (ifconfig wlan0 down), and as mac80211 does interface
> > down automatically during suspend, suspend then works without extra
> > handlers.

Yeah, it's been a while since I looked at this, thanks for the pointer.

[...]

Kind regards
Uffe




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux