[PATCH] regulator: dt-bindings: maxim,max8952: convert to dtschema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Convert the Maxim MAX8952 regulator to DT schema format.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
---
 .../devicetree/bindings/regulator/max8952.txt |  52 ---------
 .../bindings/regulator/maxim,max8952.yaml     | 109 ++++++++++++++++++
 2 files changed, 109 insertions(+), 52 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/regulator/max8952.txt
 create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max8952.yaml

diff --git a/Documentation/devicetree/bindings/regulator/max8952.txt b/Documentation/devicetree/bindings/regulator/max8952.txt
deleted file mode 100644
index 866fcdd0f4eb..000000000000
--- a/Documentation/devicetree/bindings/regulator/max8952.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-Maxim MAX8952 voltage regulator
-
-Required properties:
-- compatible: must be equal to "maxim,max8952"
-- reg: I2C slave address, usually 0x60
-- max8952,dvs-mode-microvolt: array of 4 integer values defining DVS voltages
-  in microvolts. All values must be from range <770000, 1400000>
-- any required generic properties defined in regulator.txt
-
-Optional properties:
-- max8952,vid-gpios: array of two GPIO pins used for DVS voltage selection
-- max8952,en-gpio: GPIO used to control enable status of regulator
-- max8952,default-mode: index of default DVS voltage, from <0, 3> range
-- max8952,sync-freq: sync frequency, must be one of following values:
-    - 0: 26 MHz
-    - 1: 13 MHz
-    - 2: 19.2 MHz
-  Defaults to 26 MHz if not specified.
-- max8952,ramp-speed: voltage ramp speed, must be one of following values:
-    - 0: 32mV/us
-    - 1: 16mV/us
-    - 2: 8mV/us
-    - 3: 4mV/us
-    - 4: 2mV/us
-    - 5: 1mV/us
-    - 6: 0.5mV/us
-    - 7: 0.25mV/us
-  Defaults to 32mV/us if not specified.
-- any available generic properties defined in regulator.txt
-
-Example:
-
-	vdd_arm_reg: pmic@60 {
-		compatible = "maxim,max8952";
-		reg = <0x60>;
-
-		/* max8952-specific properties */
-		max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>;
-		max8952,en-gpio = <&gpx0 1 0>;
-		max8952,default-mode = <0>;
-		max8952,dvs-mode-microvolt = <1250000>, <1200000>,
-						<1050000>, <950000>;
-		max8952,sync-freq = <0>;
-		max8952,ramp-speed = <0>;
-
-		/* generic regulator properties */
-		regulator-name = "vdd_arm";
-		regulator-min-microvolt = <770000>;
-		regulator-max-microvolt = <1400000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max8952.yaml b/Documentation/devicetree/bindings/regulator/maxim,max8952.yaml
new file mode 100644
index 000000000000..e4e8c58f6046
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max8952.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max8952.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX8952 voltage regulator
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    const: maxim,max8952
+
+  max8952,default-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    description: |
+      index of default DVS voltage
+
+  max8952,dvs-mode-microvolt:
+    minItems: 4
+    maxItems: 4
+    items:
+      minimum: 770000
+      maximum: 1400000
+    description: |
+      Array of 4 integer values defining DVS voltages in microvolts. All values
+      must be from range <770000, 1400000>.
+
+  max8952,en-gpio:
+    maxItems: 1
+    description: |
+      GPIO used to control enable status of regulator
+
+  max8952,ramp-speed:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6, 7]
+    default: 0
+    description: |
+      Voltage ramp speed, values map to:
+       - 0: 32mV/us
+       - 1: 16mV/us
+       - 2: 8mV/us
+       - 3: 4mV/us
+       - 4: 2mV/us
+       - 5: 1mV/us
+       - 6: 0.5mV/us
+       - 7: 0.25mV/us
+      Defaults to 32mV/us if not specified.
+
+  max8952,sync-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+    default: 0
+    description: |
+      Sync frequency, values map to:
+       - 0: 26 MHz
+       - 1: 13 MHz
+       - 2: 19.2 MHz
+      Defaults to 26 MHz if not specified.
+
+  max8952,vid-gpios:
+    minItems: 2
+    maxItems: 2
+    description: |
+      Array of two GPIO pins used for DVS voltage selection
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - max8952,dvs-mode-microvolt
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@60 {
+            compatible = "maxim,max8952";
+            reg = <0x60>;
+
+            max8952,vid-gpios = <&gpx0 3 GPIO_ACTIVE_HIGH>,
+                                <&gpx0 4 GPIO_ACTIVE_HIGH>;
+            max8952,default-mode = <0>;
+            max8952,dvs-mode-microvolt = <1250000>, <1200000>,
+                                         <1050000>, <950000>;
+            max8952,sync-freq = <0>;
+            max8952,ramp-speed = <0>;
+
+            regulator-name = "VARM_1.2V_C210";
+            regulator-min-microvolt = <770000>;
+            regulator-max-microvolt = <1400000>;
+            regulator-always-on;
+            regulator-boot-on;
+        };
+    };
-- 
2.30.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux