From: Sinthu Raja <sinthu.raja@xxxxxx> Hi, This series of patches add support for J721e Starter kit(SK)[1]. J721e SK is a low cost, small form factor board designed for TI’s J721E SoC. Changes in V3: - Introduced IPC sub mailbox nodes patch. - Introduced DDR carveout memory nodes patch. - Updated board name to starter kit - Fixed DTS binding errors. - Updated commit message, $subject which includes adding board URL, V2: https://lore.kernel.org/all/20210602182237.12632-1-sinthu.raja@xxxxxx/ V1: https://lore.kernel.org/all/20210602182237.12632-1-sinthu.raja@xxxxxx/ [1]https://www.ti.com/tool/SK-TDA4VM Sinthu Raja (4): dt-bindings: arm: ti: Add compatible for J721E SK arm64: dts: ti: Add support for J721E SK arm64: dts: ti: k3-j721e-sk: Add IPC sub-mailbox nodes arm64: dts: ti: k3-j721e-sk: Add DDR carveout memory nodes .../devicetree/bindings/arm/ti/k3.yaml | 1 + arch/arm64/boot/dts/ti/Makefile | 1 + arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 1002 +++++++++++++++++ 3 files changed, 1004 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-sk.dts -- 2.31.1
