Add nodes for the MSS and SLPI remoteprocs.
Signed-off-by: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 99 +++++++++++++++++++++++++++
1 file changed, 99 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 7710ca6f3374..1301ffcf588b 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -2103,6 +2103,105 @@ lpass_q6_smmu: iommu@1600000 {
clock-names = "iface", "bus";
};
+ slpi_pil: remoteproc@1c00000 {
+ compatible = "qcom,msm8996-slpi-pil";
+ reg = <0x01c00000 0x4000>;
+
+ interrupts-extended = <&intc 0 390 IRQ_TYPE_EDGE_RISING>,
+ <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack";
+
+ clocks = <&xo_board>,
+ <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+ clock-names = "xo", "aggre2";
+
+ memory-region = <&slpi_mem>;
+
+ qcom,smem-states = <&slpi_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ power-domains = <&rpmpd MSM8996_VDDSSCX>;
+ power-domain-names = "ssc_cx";
+
+ status = "disabled";
+
+ smd-edge {
+ interrupts = <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>;
+
+ label = "dsps";
+ mboxes = <&apcs_glb 25>;
+ qcom,smd-edge = <3>;
+ qcom,remote-pid = <3>;
+ };
+ };
+
+ mss_pil: remoteproc@2080000 {
+ compatible = "qcom,msm8996-mss-pil";
+ reg = <0x2080000 0x100>,
+ <0x2180000 0x020>;
+ reg-names = "qdsp6", "rmb";
+
+ interrupts-extended = <&intc 0 448 IRQ_TYPE_EDGE_RISING>,
+ <&mpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&mpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&mpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&mpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&mpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack",
+ "shutdown-ack";
+
+ clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+ <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+ <&gcc GCC_BOOT_ROM_AHB_CLK>,
+ <&xo_board>,
+ <&gcc GCC_MSS_GPLL0_DIV_CLK>,
+ <&gcc GCC_MSS_SNOC_AXI_CLK>,
+ <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>,
+ <&rpmcc RPM_SMD_PCNOC_CLK>,
+ <&rpmcc RPM_SMD_QDSS_CLK>;
+ clock-names = "iface", "bus", "mem", "xo", "gpll0_mss",
+ "snoc_axi", "mnoc_axi", "pnoc", "qdss";
+
+ resets = <&gcc GCC_MSS_RESTART>;
+ reset-names = "mss_restart";
+
+ power-domains = <&rpmpd MSM8996_VDDCX>,
+ <&rpmpd MSM8996_VDDMX>;
+ power-domain-names = "cx", "mx";
+
+ qcom,smem-states = <&mpss_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
+
+ status = "disabled";
+
+ mba {
+ memory-region = <&mba_mem>;
+ };
+
+ mpss {
+ memory-region = <&mpss_mem>;
+ };
+
+ smd-edge {
+ interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+
+ label = "mpss";
+ mboxes = <&apcs_glb 12>;
+ qcom,smd-edge = <0>;
+ qcom,remote-pid = <1>;
+ };
+ };
+
stm@3002000 {
compatible = "arm,coresight-stm", "arm,primecell";
reg = <0x3002000 0x1000>,
--
2.33.0
