Refer to the discussion [1] when try to enable i.MX8MM PCIe support, one standalone PCIe PHY driver should be seperated from i.MX PCIe driver when enable i.MX8MM PCIe support. This patch-set adds the standalone PCIe PHY driver suport, and as a preparatory to add the i.MX8MM PCIe support later. The PCIe works on i.MX8MM EVK board based the the blkctrl power driver [2] and this PHY driver patch-set. [1] https://patchwork.ozlabs.org/project/linux-pci/patch/20210510141509.929120-3-l.stach@xxxxxxxxxxxxxx/ [2] https://patchwork.kernel.org/project/linux-arm-kernel/cover/20210910202640.980366-1-l.stach@xxxxxxxxxxxxxx/ Changes v1 --> v2: - Update the license of the dt-binding header file to make the license compatible with dts files. - Fix the dt_binding_check errors. [PATCH v2 1/4] dt-bindings: phy: phy-imx8-pcie: Add binding for the [PATCH v2 2/4] dt-bindings: phy: add imx8 pcie phy driver support [PATCH v2 3/4] arm64: dts: imx8mm: add the pcie phy support [PATCH v2 4/4] phy: freescale: pcie: initialize the imx8 pcie Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml | 67 ++++++++++++++++++++++++++++++++ arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 4 ++ arch/arm64/boot/dts/freescale/imx8mm.dtsi | 12 ++++++ drivers/phy/freescale/Kconfig | 9 +++++ drivers/phy/freescale/Makefile | 1 + drivers/phy/freescale/phy-fsl-imx8-pcie.c | 167 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ include/dt-bindings/phy/phy-imx8-pcie.h | 14 +++++++ 7 files changed, 274 insertions(+)