On Thu, Sep 23, 2021 at 09:52:55PM -0500, Bjorn Andersson wrote:
> With the newly introduced aux-bus under the TI SN65DSI86 the panel
> node should be described as a child instead of a standalone node, move
> it there.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> ---
> .../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 27 +++++++++----------
> 1 file changed, 13 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
> index bd22352b6c7a..4818ca6d820d 100644
> --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
> @@ -56,20 +56,6 @@ mode {
> };
> };
>
> - panel {
> - compatible = "boe,nv133fhm-n61";
> - no-hpd;
> - backlight = <&backlight>;
There is some prerequisite change for this patch? I do not find this
backlight node on v5.15-rc, neither linux-next.
Shawn
> -
> - ports {
> - port {
> - panel_in_edp: endpoint {
> - remote-endpoint = <&sn65dsi86_out>;
> - };
> - };
> - };
> - };
> -
> /* Reserved memory changes for IPA */
> reserved-memory {
> wlan_msa_mem: memory@8c400000 {
> @@ -441,6 +427,19 @@ sn65dsi86_out: endpoint {
> };
> };
> };
> +
> + aux-bus {
> + panel: panel {
> + compatible = "boe,nv133fhm-n61";
> + backlight = <&backlight>;
> +
> + port {
> + panel_in_edp: endpoint {
> + remote-endpoint = <&sn65dsi86_out>;
> + };
> + };
> + };
> + };
> };
> };
>
> --
> 2.32.0
>
