The Atmel maXTouch driver assumed that the IRQ type flags will always be passed using platform data but this is not true when booting using Device Trees. In these setups the interrupt type was ignored by the driver when requesting an IRQ. This means that it will fail if a machine specified other type than IRQ_TYPE_NONE. The right approach is to get the IRQ flags that was parsed by OF from the "interrupt" Device Tree propery. Signed-off-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx> --- This patch was first sent as a part of a two part series along with [PATCH 2/2] Input: atmel_mxt_ts - Add keycodes array example. But there are no dependencies between these two patches so there is no need to resend that one with no changes for v2. Changes since v1: - Assign flags to pdata->irqflags in mxt_parse_dt() instead of probe(). Suggested by Tomasz Figa. drivers/input/touchscreen/atmel_mxt_ts.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 03b8571..5c8cbd3 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -22,6 +22,7 @@ #include <linux/i2c.h> #include <linux/i2c/atmel_mxt_ts.h> #include <linux/input/mt.h> +#include <linux/irq.h> #include <linux/interrupt.h> #include <linux/of.h> #include <linux/slab.h> @@ -2093,6 +2094,8 @@ static struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client) if (!pdata) return ERR_PTR(-ENOMEM); + pdata->irqflags = irq_get_trigger_type(client->irq); + if (of_find_property(client->dev.of_node, "linux,gpio-keymap", &proplen)) { pdata->t19_num_keys = proplen / sizeof(u32); -- 2.0.0.rc2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html