On 24/09/2021 13:35, Geert Uytterhoeven wrote:
> make dtbs_check:
>
> arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dt.yaml: bridge@2c: reg:0:0: 45 was expected
>
> According to the datasheet, the I2C address can be either 0x2c or 0x2d,
> depending on the ADDR control input.
>
> Fixes: e3896e6dddf0b821 ("dt-bindings: drm/bridge: Document sn65dsi86 bridge bindings")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> ---
> Also seen with the in-flight Falcon DSI display output patch:
And having been running dtbs_check today on this branch I was going to
tackle this same issue ...
But you've beaten me to it ;-)
Reviewed-by: Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx>
>
> arch/arm64/boot/dts/renesas/r8a779a0-falcon.dt.yaml: sn65dsi86@2c: reg:0:0: 45 was expected
> ---
> .../devicetree/bindings/display/bridge/ti,sn65dsi86.yaml | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
> index 1c2daf7c24cc0417..911564468c5e0f86 100644
> --- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
> @@ -18,7 +18,7 @@ properties:
> const: ti,sn65dsi86
>
> reg:
> - const: 0x2d
> + enum: [ 0x2c, 0x2d ]
>
> enable-gpios:
> maxItems: 1
>
--
--
Kieran
