Le jeudi 23 septembre 2021 à 10:45 +0000, Ming Qian a écrit : > > -----Original Message----- > > From: Nicolas Dufresne [mailto:nicolas@xxxxxxxxxxxx] > > Sent: Wednesday, September 22, 2021 10:14 PM > > To: Ming Qian <ming.qian@xxxxxxx>; mchehab@xxxxxxxxxx; > > shawnguo@xxxxxxxxxx; robh+dt@xxxxxxxxxx; s.hauer@xxxxxxxxxxxxxx > > Cc: hverkuil-cisco@xxxxxxxxx; kernel@xxxxxxxxxxxxxx; festevam@xxxxxxxxx; > > dl-linux-imx <linux-imx@xxxxxxx>; Aisheng Dong <aisheng.dong@xxxxxxx>; > > linux-media@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; > > devicetree@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > > Subject: [EXT] Re: [PATCH v9 00/13] amphion video decoder/encoder driver > > > > Caution: EXT Email > > > > Hi Ming, > > > > Le lundi 13 septembre 2021 à 17:11 +0800, Ming Qian a écrit : > > > Hi all, > > > > > > This patch series adds support for > > > the amphion video encoder and decoder > > > via the VPU block present in imx8q platforms. > > > Currently, support for IMX8QXP and IMX8QM is included. > > > > I've been trying to test this driver, based it on mainline 5.15-rc2 in > > absence of > > recommendation here. There seems to be poor mainline support for this board, > > notably only 1 CPU come up. Finally, I could not test anything as the driver > > failed to boot the decoders and encoder cores: > > > > [ 30.766160] [VPU CORE][0] decoder boot > > [ 31.873175] [VPU CORE][0] decoder boot timeout > > [ 31.878057] [VPU V4L2]there is no core for decoder > > [ 1766.495963] [VPU CORE][1] encoder boot [ 1767.524957] [VPU CORE][1] > > encoder boot timeout [ 1767.529724] [VPU V4L2]there is no core for encoder > > > > Please, let me know how I can get passed these issues. I have used firmwares > > referenced in Yocto tree: > > > > > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.n > > xp.com%2Flgfiles%2FNMG%2FMAD%2FYOCTO%2Ffirmware-imx-7.9.bin& > > ;data=04%7C01%7Cming.qian%40nxp.com%7Ce50ac93addb444f7cd9b08d97 > > dd33c6e%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C63767916 > > 8483236134%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIj > > oiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=cM3%2F > > Go0MxD0RSDmS5ELr6yCdNe4EH%2FeTAFtcAcBArRo%3D&reserved=0 > > > > Firmware for this driver will also be a subject to tackle. In an ideal > > world, the > > "self extracted" script requirement to accept your EULA would need to be > > waved, and distribution of the firmware should go into linux-firmwares. I > > believe firmwares are still allowed to have some user agreement, but I > > suppose > > there must be guidelines, best is to ask there directly. > > > > regards, > > Nicolas > > > > Seems you use the wrong firmware, I will send the firmware to you. > My commit base is 9c3a0f285248899dfa81585bc5d5bc9ebdb8fead, > You can find it in the bottom of this cover. > > Would you please explain the linux-firmware issue in detail I believe that to merge a driver (non staging) that depends on a firmware (I'll let Hans and others confirm), you need to submit this firmware, along with a non-interactive licence to be included in the linux-firmware project. NXP notably have an SDMA firmware in there, with a licence file. Perhaps these developers can assist in this regard. Often that takes time due to legal requirement of moving from an interactive EULA to a licence file. In later version, it would be nice to explain in the cover later the status of firmware distribution, and how to obtain the correct version of (specially if not yet in linux-firmware). Thanks for sending me the firmwares, I will see if I can do more tests. > > > > > > > It features decoding for the following formats: > > > - H.264 > > > - HEVC > > > - MPEG4 > > > - MPEG2 > > > - VC1 > > > - VP8 > > > > > > It features encoding for the following formats: > > > - H.264 > > > > > > The driver creates a separate device node for the encoder and decoder. > > > > > > Changelog: > > > > > > v9 > > > - drop V4L2_BUF_FLAG_CODECCONFIG > > > - drop V4L2_EVENT_CODEC_ERROR > > > - drop V4L2_EVENT_SKIP > > > - use the v4l2_buffer.sequence counter > > > - fix some build warnings with W=1 reported by kernel test robot > > > > > > v8 > > > - move driver from driver/media/platform/imx/vpu-8q to > > > driver/media/platform/amphion > > > - rename driver name to amphion > > > - remove imx_vpu.h > > > - move the definition of V4L2_EVENT_CODEC_ERROR to videodev2.h > > > - move the definition of V4L2_EVENT_SKIP to videodev2.h > > > > > > v7 > > > - fix build warnings with W=1 reported by kernel test robot > > > > > > v6: > > > - rename V4L2_PIX_FMT_NT8 to V4L2_PIX_FMT_NV12_8L128 > > > - rename V4L2_PIX_FMT_NT10 to V4L2_PIX_FMT_NV12_10BE_8L128 > > > > > > v5: > > > - move some definition from imx_vph.h to videodev2.h > > > - remove some unnecessary content > > > - add some documentation descriptions > > > - pass the lateset v4l2-compliance test > > > > > > v4: > > > - redefine the memory-region in devicetree bindings documentation > > > - use v4l2's mechanism to implement synchronize queuing ioctl > > > - remove the unnecessary mutex ioctl_sync > > > - don't notify source change event if the parameters are same as > > > previously established > > > - add flag V4L2_FMT_FLAG_DYN_RESOLUTION to decoder's capture format > > > > > > v3: > > > - don't make vpu device node a simple-bus > > > - trigger probing vpu core in the driver > > > - remove unnecessary vpu core index property > > > > > > v2: > > > - fix dt bindings build error > > > - split driver patch into several parts to avoid exceeding bytes limit > > > > > > Compliance > > > ========== > > > # v4l2-compliance -d /dev/video0 > > > v4l2-compliance 1.21.0-4838, 64 bits, 64-bit time_t v4l2-compliance > > > SHA: 22466798f9a9 2021-08-25 11:05:21 > > > > > > Compliance test for amphion-vpu device /dev/video0: > > > > > > Driver Info: > > > Driver name : amphion-vpu > > > Card type : amphion vpu decoder > > > Bus info : platform: amphion-vpu > > > Driver version : 5.14.0 > > > Capabilities : 0x84204000 > > > Video Memory-to-Memory Multiplanar > > > Streaming > > > Extended Pix Format > > > Device Capabilities > > > Device Caps : 0x04204000 > > > Video Memory-to-Memory Multiplanar > > > Streaming > > > Extended Pix Format > > > Detected Stateful Decoder > > > > > > Required ioctls: > > > test VIDIOC_QUERYCAP: OK > > > test invalid ioctls: OK > > > > > > Allow for multiple opens: > > > test second /dev/video0 open: OK > > > test VIDIOC_QUERYCAP: OK > > > test VIDIOC_G/S_PRIORITY: OK > > > test for unlimited opens: OK > > > > > > Debug ioctls: > > > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > > > test VIDIOC_LOG_STATUS: OK (Not Supported) > > > > > > Input ioctls: > > > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > > > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > > > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > > > test VIDIOC_ENUMAUDIO: OK (Not Supported) > > > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > > > test VIDIOC_G/S_AUDIO: OK (Not Supported) > > > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > > > > > Output ioctls: > > > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > > > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > > > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > > > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > > > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > > > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > > > > > Input/Output configuration ioctls: > > > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > > > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > > > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > > > test VIDIOC_G/S_EDID: OK (Not Supported) > > > > > > Control ioctls: > > > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > > > test VIDIOC_QUERYCTRL: OK > > > test VIDIOC_G/S_CTRL: OK > > > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > > > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK > > > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > > > Standard Controls: 3 Private Controls: 0 > > > > > > Format ioctls: > > > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > > > test VIDIOC_G/S_PARM: OK (Not Supported) > > > test VIDIOC_G_FBUF: OK (Not Supported) > > > test VIDIOC_G_FMT: OK > > > test VIDIOC_TRY_FMT: OK > > > test VIDIOC_S_FMT: OK > > > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > > > test Cropping: OK (Not Supported) > > > test Composing: OK > > > test Scaling: OK (Not Supported) > > > > > > Codec ioctls: > > > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > > > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > > > test VIDIOC_(TRY_)DECODER_CMD: OK > > > > > > Buffer ioctls: > > > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > > > test VIDIOC_EXPBUF: OK > > > test Requests: OK (Not Supported) > > > > > > Total for amphion-vpu device /dev/video0: 45, Succeeded: 45, Failed: > > > 0, Warnings: 0 > > > > > > # v4l2-compliance -d /dev/video1 > > > v4l2-compliance 1.21.0-4838, 64 bits, 64-bit time_t v4l2-compliance > > > SHA: 22466798f9a9 2021-08-25 11:05:21 > > > > > > Compliance test for amphion-vpu device /dev/video1: > > > > > > Driver Info: > > > Driver name : amphion-vpu > > > Card type : amphion vpu encoder > > > Bus info : platform: amphion-vpu > > > Driver version : 5.14.0 > > > Capabilities : 0x84204000 > > > Video Memory-to-Memory Multiplanar > > > Streaming > > > Extended Pix Format > > > Device Capabilities > > > Device Caps : 0x04204000 > > > Video Memory-to-Memory Multiplanar > > > Streaming > > > Extended Pix Format > > > Detected Stateful Encoder > > > > > > Required ioctls: > > > test VIDIOC_QUERYCAP: OK > > > test invalid ioctls: OK > > > > > > Allow for multiple opens: > > > test second /dev/video1 open: OK > > > test VIDIOC_QUERYCAP: OK > > > test VIDIOC_G/S_PRIORITY: OK > > > test for unlimited opens: OK > > > > > > Debug ioctls: > > > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > > > test VIDIOC_LOG_STATUS: OK (Not Supported) > > > > > > Input ioctls: > > > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > > > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > > > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > > > test VIDIOC_ENUMAUDIO: OK (Not Supported) > > > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > > > test VIDIOC_G/S_AUDIO: OK (Not Supported) > > > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > > > > > Output ioctls: > > > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > > > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > > > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > > > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > > > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > > > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > > > > > Input/Output configuration ioctls: > > > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > > > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > > > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > > > test VIDIOC_G/S_EDID: OK (Not Supported) > > > > > > Control ioctls: > > > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > > > test VIDIOC_QUERYCTRL: OK > > > test VIDIOC_G/S_CTRL: OK > > > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > > > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK > > > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > > > Standard Controls: 20 Private Controls: 0 > > > > > > Format ioctls: > > > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > > > test VIDIOC_G/S_PARM: OK > > > test VIDIOC_G_FBUF: OK (Not Supported) > > > test VIDIOC_G_FMT: OK > > > test VIDIOC_TRY_FMT: OK > > > test VIDIOC_S_FMT: OK > > > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > > > test Cropping: OK > > > test Composing: OK (Not Supported) > > > test Scaling: OK (Not Supported) > > > > > > Codec ioctls: > > > test VIDIOC_(TRY_)ENCODER_CMD: OK > > > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > > > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > > > > > Buffer ioctls: > > > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > > > test VIDIOC_EXPBUF: OK > > > test Requests: OK (Not Supported) > > > > > > Total for amphion-vpu device /dev/video1: 45, Succeeded: 45, Failed: > > > 0, Warnings: 0 > > > > > > Ming Qian (13): > > > dt-bindings: media: amphion: add amphion video codec bindings > > > media:Add nt8 and nt10 video format. > > > media: amphion: add amphion vpu device driver > > > media: amphion: add vpu core driver > > > media: amphion: implement vpu core communication based on mailbox > > > media: amphion: add vpu v4l2 m2m support > > > media: amphion: add v4l2 m2m vpu encoder stateful driver > > > media: amphion: add v4l2 m2m vpu decoder stateful driver > > > media: amphion: implement windsor encoder rpc interface > > > media: amphion: implement malone decoder rpc interface > > > ARM64: dts: freescale: imx8q: add imx vpu codec entries > > > firmware: imx: scu-pd: imx8q: add vpu mu resources > > > MAINTAINERS: add AMPHION VPU CODEC V4L2 driver entry > > > > > > .../bindings/media/amphion,vpu.yaml | 178 ++ > > > .../media/v4l/pixfmt-yuv-planar.rst | 15 + > > > MAINTAINERS | 9 + > > > .../arm64/boot/dts/freescale/imx8-ss-vpu.dtsi | 72 + > > > arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 17 + > > > arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 24 + > > > drivers/firmware/imx/scu-pd.c | 4 + > > > drivers/media/platform/Kconfig | 19 + > > > drivers/media/platform/Makefile | 2 + > > > drivers/media/platform/amphion/Makefile | 23 + > > > drivers/media/platform/amphion/vdec.c | 1652 > > ++++++++++++++++ > > > drivers/media/platform/amphion/venc.c | 1382 > > ++++++++++++++ > > > drivers/media/platform/amphion/vpu.h | 333 ++++ > > > drivers/media/platform/amphion/vpu_cmds.c | 435 +++++ > > > drivers/media/platform/amphion/vpu_cmds.h | 25 + > > > drivers/media/platform/amphion/vpu_codec.h | 68 + > > > drivers/media/platform/amphion/vpu_color.c | 192 ++ > > > drivers/media/platform/amphion/vpu_core.c | 901 +++++++++ > > > drivers/media/platform/amphion/vpu_core.h | 16 + > > > drivers/media/platform/amphion/vpu_dbg.c | 496 +++++ > > > drivers/media/platform/amphion/vpu_defs.h | 186 ++ > > > .../media/platform/amphion/vpu_dev_imx8q.c | 72 + > > > drivers/media/platform/amphion/vpu_drv.c | 215 +++ > > > drivers/media/platform/amphion/vpu_helpers.c | 453 +++++ > > > drivers/media/platform/amphion/vpu_helpers.h | 72 + > > > drivers/media/platform/amphion/vpu_imx8q.c | 218 +++ > > > drivers/media/platform/amphion/vpu_imx8q.h | 116 ++ > > > drivers/media/platform/amphion/vpu_log.h | 44 + > > > drivers/media/platform/amphion/vpu_malone.c | 1683 > > +++++++++++++++++ > > > drivers/media/platform/amphion/vpu_malone.h | 42 + > > > drivers/media/platform/amphion/vpu_mbox.c | 126 ++ > > > drivers/media/platform/amphion/vpu_mbox.h | 16 + > > > drivers/media/platform/amphion/vpu_msgs.c | 413 ++++ > > > drivers/media/platform/amphion/vpu_msgs.h | 14 + > > > drivers/media/platform/amphion/vpu_rpc.c | 263 +++ > > > drivers/media/platform/amphion/vpu_rpc.h | 463 +++++ > > > drivers/media/platform/amphion/vpu_v4l2.c | 625 ++++++ > > > drivers/media/platform/amphion/vpu_v4l2.h | 53 + > > > drivers/media/platform/amphion/vpu_windsor.c | 1244 ++++++++++++ > > > drivers/media/platform/amphion/vpu_windsor.h | 39 + > > > drivers/media/v4l2-core/v4l2-ioctl.c | 2 + > > > include/uapi/linux/videodev2.h | 4 + > > > 42 files changed, 12226 insertions(+) create mode 100644 > > > Documentation/devicetree/bindings/media/amphion,vpu.yaml > > > create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi > > > create mode 100644 drivers/media/platform/amphion/Makefile > > > create mode 100644 drivers/media/platform/amphion/vdec.c > > > create mode 100644 drivers/media/platform/amphion/venc.c > > > create mode 100644 drivers/media/platform/amphion/vpu.h > > > create mode 100644 drivers/media/platform/amphion/vpu_cmds.c > > > create mode 100644 drivers/media/platform/amphion/vpu_cmds.h > > > create mode 100644 drivers/media/platform/amphion/vpu_codec.h > > > create mode 100644 drivers/media/platform/amphion/vpu_color.c > > > create mode 100644 drivers/media/platform/amphion/vpu_core.c > > > create mode 100644 drivers/media/platform/amphion/vpu_core.h > > > create mode 100644 drivers/media/platform/amphion/vpu_dbg.c > > > create mode 100644 drivers/media/platform/amphion/vpu_defs.h > > > create mode 100644 drivers/media/platform/amphion/vpu_dev_imx8q.c > > > create mode 100644 drivers/media/platform/amphion/vpu_drv.c > > > create mode 100644 drivers/media/platform/amphion/vpu_helpers.c > > > create mode 100644 drivers/media/platform/amphion/vpu_helpers.h > > > create mode 100644 drivers/media/platform/amphion/vpu_imx8q.c > > > create mode 100644 drivers/media/platform/amphion/vpu_imx8q.h > > > create mode 100644 drivers/media/platform/amphion/vpu_log.h > > > create mode 100644 drivers/media/platform/amphion/vpu_malone.c > > > create mode 100644 drivers/media/platform/amphion/vpu_malone.h > > > create mode 100644 drivers/media/platform/amphion/vpu_mbox.c > > > create mode 100644 drivers/media/platform/amphion/vpu_mbox.h > > > create mode 100644 drivers/media/platform/amphion/vpu_msgs.c > > > create mode 100644 drivers/media/platform/amphion/vpu_msgs.h > > > create mode 100644 drivers/media/platform/amphion/vpu_rpc.c > > > create mode 100644 drivers/media/platform/amphion/vpu_rpc.h > > > create mode 100644 drivers/media/platform/amphion/vpu_v4l2.c > > > create mode 100644 drivers/media/platform/amphion/vpu_v4l2.h > > > create mode 100644 drivers/media/platform/amphion/vpu_windsor.c > > > create mode 100644 drivers/media/platform/amphion/vpu_windsor.h > > > > > > > > > base-commit: 9c3a0f285248899dfa81585bc5d5bc9ebdb8fead > > >
