Re: [RESEND] [PATCH v2 1/2] dt-bindings: display: bridge: Add binding for R-Car MIPI DSI/CSI-2 TX

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Laurent,

On Wed, Sep 22, 2021 at 10:08 AM Laurent Pinchart
<laurent.pinchart@xxxxxxxxxxxxxxxx> wrote:
> On Wed, Sep 22, 2021 at 08:43:57AM +0200, Geert Uytterhoeven wrote:
> > On Wed, Sep 22, 2021 at 3:27 AM Laurent Pinchart wrote:
> > > On Tue, Sep 21, 2021 at 05:53:52PM +0200, Geert Uytterhoeven wrote:
> > > > On Wed, Jul 28, 2021 at 6:26 PM Laurent Pinchart wrote:
> > > > > The R-Car MIPI DSI/CSI-2 TX is embedded in the Renesas R-Car V3U SoC. It
> > > > > can operate in either DSI or CSI-2 mode, with up to four data lanes.
> > > > >
> > > > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> > > > > Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
> > > >
> > > > Thanks for your patch!
> > > >
> > > > > --- /dev/null
> > > > > +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml
> > > > > @@ -0,0 +1,118 @@
> > > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > > > +%YAML 1.2
> > > > > +---
> > > > > +$id: http://devicetree.org/schemas/display/bridge/renesas,dsi-csi2-tx.yaml#
> > > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > > +
> > > > > +title: Renesas R-Car MIPI DSI/CSI-2 Encoder
> > > > > +
> > > > > +maintainers:
> > > > > +  - Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> > > > > +
> > > > > +description: |
> > > > > +  This binding describes the MIPI DSI/CSI-2 encoder embedded in the Renesas
> > > > > +  R-Car V3U SoC. The encoder can operate in either DSI or CSI-2 mode, with up
> > > > > +  to four data lanes.
> > > > > +
> > > > > +properties:
> > > > > +  compatible:
> > > > > +    enum:
> > > > > +      - renesas,r8a779a0-dsi-csi2-tx    # for V3U
> > > > > +
> > > > > +  reg:
> > > > > +    maxItems: 1
> > > > > +
> > > > > +  clocks:
> > > > > +    items:
> > > > > +      - description: Functional clock
> > > > > +      - description: DSI (and CSI-2) functional clock
> > > > > +      - description: PLL reference clock
> > > > > +
> > > > > +  clock-names:
> > > > > +    items:
> > > > > +      - const: fck
> > > > > +      - const: dsi
> > > > > +      - const: pll
> > > >
> > > > No interrupts?
> > > > The hardware manual says there are 9 interrupts.
> > >
> > > Who comes up with such insanely high numbers of interrupts ? :-)
> > >
> > > What the hardware manual doesn't document is how interrupts are mapped.
> > > There's indeed 9 of them, and there are 9 interrupt sources, but that's
> > > all we know. I can easily add a
> > >
> > >   interrupts:
> > >     maxItems: 9
> > >
> > > but I can add interrupt names without additional information. It may be
> > > possible to deduce some of the interrupt mappings from experiments, but
> > > not all of them. What do you think would be a good way forward ? Leave
> > > the interrupts out for now as we don't have the information ? Only list
> > > the interrupts but not their names ? Something else ?
> >
> > I think what we did in the past is not list the interrupts at all.
> > They can be added once we receive more documentation.
>
> Sounds good to me, as that's what this patch does already ;-) A R-b or
> A-b tag is welcome.

Your wish is my command...

Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux