>From the analog waveform analysis result, SD/SDIO controller
of AST2600 cannot always work well with 200MHz. The upper bound
stable frequency for SD/SDIO controller is 100MHz. Thus, SDR50
supported bit, instead of SDR104, in capability 2 register
should be set in advance.
Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@xxxxxxxxxxxxxx>
---
drivers/mmc/host/sdhci-of-aspeed.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/mmc/host/sdhci-of-aspeed.c b/drivers/mmc/host/sdhci-of-aspeed.c
index 6e4e132903a6..c6eaeb02e3f9 100644
--- a/drivers/mmc/host/sdhci-of-aspeed.c
+++ b/drivers/mmc/host/sdhci-of-aspeed.c
@@ -35,6 +35,8 @@
#define ASPEED_SDC_CAP1_1_8V (0 * 32 + 26)
/* SDIO{14,24} */
#define ASPEED_SDC_CAP2_SDR104 (1 * 32 + 1)
+/* SDIO{14,24} */
+#define ASPEED_SDC_CAP2_SDR50 (1 * 32 + 0)
struct aspeed_sdc {
struct clk *clk;
@@ -410,11 +412,17 @@ static int aspeed_sdhci_probe(struct platform_device *pdev)
sdhci_get_of_property(pdev);
if (of_property_read_bool(np, "mmc-hs200-1_8v") ||
+ of_property_read_bool(np, "sd-uhs-sdr50") ||
of_property_read_bool(np, "sd-uhs-sdr104")) {
aspeed_sdc_set_slot_capability(host, dev->parent, ASPEED_SDC_CAP1_1_8V,
true, slot);
}
+ if (of_property_read_bool(np, "sd-uhs-sdr50")) {
+ aspeed_sdc_set_slot_capability(host, dev->parent, ASPEED_SDC_CAP2_SDR50,
+ true, slot);
+ }
+
if (of_property_read_bool(np, "sd-uhs-sdr104")) {
aspeed_sdc_set_slot_capability(host, dev->parent, ASPEED_SDC_CAP2_SDR104,
true, slot);
--
2.17.1
