This patch series aims to configure SD and eMMC controllers' clock frequency and clock phase parameters. The main modification is the clock phase calculation method which has been checked with the HW IP designer. Also, the clock source detection method is updated for AST2600-A2/A3. This patch series has been verified on AST2600-A3 EVB. Chin-Ting Kuo (10): clk: aspeed: ast2600: Porting sdhci clock source sdhci: aspeed: Add SDR50 support dts: aspeed: ast2600: Support SDR50 for SD device mmc: Add invert flag for clock phase signedness mmc: aspeed: Adjust delay taps calculation method arm: dts: aspeed: Change eMMC device compatible arm: dts: aspeed: Adjust clock phase parameter arm: dts: ibm: Adjust clock phase parameter dt-bindings: mmc: aspeed: Add max-tap-delay property dt-bindings: mmc: aspeed: Add a new compatible string .../devicetree/bindings/mmc/aspeed,sdhci.yaml | 4 + arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts | 8 ++ arch/arm/boot/dts/aspeed-ast2600-evb.dts | 11 +- arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 3 +- arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 3 +- arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 3 +- arch/arm/boot/dts/aspeed-g6.dtsi | 2 +- drivers/clk/clk-ast2600.c | 69 ++++++++-- drivers/mmc/core/host.c | 10 +- drivers/mmc/host/sdhci-of-aspeed.c | 123 ++++++++++++++---- include/linux/mmc/host.h | 2 + 11 files changed, 193 insertions(+), 45 deletions(-) -- 2.17.1
