Quoting Satya Priya (2021-09-17 03:45:38)
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> index 52638e2..3b3af49 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> @@ -207,6 +207,97 @@
> };
> };
>
> +&i2c1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "okay";
> +
> + pm8008_chip: pm8008@8 {
> + compatible = "qcom,pm8008";
> + reg = <0x8>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pm8008_active>;
> + };
> +
> + pm8008_ldo: pm8008@9 {
[...]
> +
> + pm8008_l7: regulator@4600 {
> + reg = <0x4600>;
> + regulator-name = "pm8008_l7";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3544000>;
> + qcom,min-dropout-voltage = <96000>;
Is this headroom? Is it actually configurable or is it merely a property
of the hardware? If it's the latter then it should be in the driver and
not in the DTS.
> + };
> + };
> + };
> +};
> +
> &qfprom {
> vcc-supply = <&vreg_l1c_1p8>;
> };
> @@ -313,6 +404,18 @@
>
> /* PINCTRL - additions to nodes defined in sc7280.dtsi */
>
> +&pm8350c_gpios {
> + pm8008_reset {
Is this a pinctrl node?
> + pm8008_active: pm8008_active {
Please use dashes in node names wherever an underscore goes.
> + pins = "gpio4";
> + function = "normal";
> + bias-disable;
> + output-high;
> + power-source = <0>;
> + };
> + };
> +};
