On Mon, Sep 20, 2021 at 07:57:13PM +0530, Apurva Nandan wrote:
> Change the nodename in the example with spi-nand from 'spi-flash@1'
> to 'flash@1' to make the schema uniform with both spi-nand and spi-nor
> flashes. jedec,spi-nor.yaml uses 'flash@' nodename for spi-nor flashes,
> so make the spi-nand examples in dt-bindings use it too for uniformity.
>
> Signed-off-by: Apurva Nandan <a-nandan@xxxxxx>
> ---
> Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Seems reasonable.
Reviewed-by: Serge Semin <fancer.lancer@xxxxxxxxx>
-Sergey
>
> diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
> index ca91201a9926..d7e08b03e204 100644
> --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
> +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
> @@ -171,7 +171,7 @@ examples:
> cs-gpios = <&gpio0 13 0>,
> <&gpio0 14 0>;
> rx-sample-delay-ns = <3>;
> - spi-flash@1 {
> + flash@1 {
> compatible = "spi-nand";
> reg = <1>;
> rx-sample-delay-ns = <7>;
> --
> 2.25.1
>
