[PATCH v2 2/2] dt-bindings: snps,dw-apb-ssi: Use 'flash' node name instead of 'spi-flash' in example

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Change the nodename in the example with spi-nand from 'spi-flash@1'
to 'flash@1' to make the schema uniform with both spi-nand and spi-nor
flashes. jedec,spi-nor.yaml uses 'flash@' nodename for spi-nor flashes,
so make the spi-nand examples in dt-bindings use it too for uniformity.

Signed-off-by: Apurva Nandan <a-nandan@xxxxxx>
---
 Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
index ca91201a9926..d7e08b03e204 100644
--- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
+++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
@@ -171,7 +171,7 @@ examples:
       cs-gpios = <&gpio0 13 0>,
                  <&gpio0 14 0>;
       rx-sample-delay-ns = <3>;
-      spi-flash@1 {
+      flash@1 {
         compatible = "spi-nand";
         reg = <1>;
         rx-sample-delay-ns = <7>;
-- 
2.25.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux