On Thu, Aug 19, 2021 at 9:15 PM Alistair Francis <alistair@xxxxxxxxxxxxx> wrote: > > This series applied on top of the "mfd: simple-mfd-i2c: Add support for > registering devices via MFD cells" patch. Once "mfd: simple-mfd-i2c: Add > support for registering devices via MFD cells" is merged this series is > ready to go. > > v11: > - Address comments on hwmon > - Improve "mfd: simple-mfd-i2c: Add a Kconfig name" commit message > v10: > - Use dev_get_regmap() instead of dev_get_drvdata() > v9: > - Convert to use the simple-mfd-i2c instead > > Alistair Francis (10): > dt-bindings: mfd: Initial commit of silergy,sy7636a.yaml > mfd: simple-mfd-i2c: Add a Kconfig name > mfd: simple-mfd-i2c: Enable support for the silergy,sy7636a > regulator: sy7636a: Remove requirement on sy7636a mfd > thermal: sy7636a: Add thermal driver for sy7636a > hwmon: sy7636a: Add temperature driver for sy7636a > ARM: imx_v6_v7_defconfig: Enable silergy,sy7636a > ARM: dts: imx7d: remarkable2: Enable silergy,sy7636a > ARM: imx_v6_v7_defconfig: Enable backlight class devices > ARM: dts: imx7d: remarkable2: Enable lcdif It doesn't look like "mfd: simple-mfd-i2c: Add support for registering devices via MFD cells" has made it into 5.15, is something else required? Alistair > > .../bindings/mfd/silergy,sy7636a.yaml | 79 ++++++++++++ > arch/arm/boot/dts/imx7d-remarkable2.dts | 115 ++++++++++++++++++ > arch/arm/configs/imx_v6_v7_defconfig | 5 + > drivers/hwmon/Kconfig | 10 ++ > drivers/hwmon/Makefile | 1 + > drivers/hwmon/sy7636a-hwmon.c | 77 ++++++++++++ > drivers/mfd/Kconfig | 2 +- > drivers/mfd/simple-mfd-i2c.c | 12 ++ > drivers/regulator/Kconfig | 1 - > drivers/regulator/sy7636a-regulator.c | 2 +- > drivers/thermal/Kconfig | 6 + > drivers/thermal/Makefile | 1 + > drivers/thermal/sy7636a_thermal.c | 94 ++++++++++++++ > include/linux/mfd/sy7636a.h | 41 +++++++ > 14 files changed, 443 insertions(+), 3 deletions(-) > create mode 100644 Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml > create mode 100644 drivers/hwmon/sy7636a-hwmon.c > create mode 100644 drivers/thermal/sy7636a_thermal.c > create mode 100644 include/linux/mfd/sy7636a.h > > -- > 2.31.1 >
