[PATCH v9 00/11] Add Wacom I2C support to rM2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add support to the reMarkable2 (rM2) for the Wacom I2C device.

This is based on the reMarkable Linux fork and with this series I am
able to use the Wacom digitiser on the rM2.

v9:
 - Add two new patches
 - Fixup the device tree interrupt line
v7:
 - Fx the compatible name and documentation

Alistair Francis (11):
  dt-bindings: Add Wacom to vendor bindings
  dt-bindings: touchscreen: Initial commit of wacom,i2c
  Input: wacom_i2c - Add device tree support to wacom_i2c
  Input: wacom_i2c - Add touchscren properties
  Input: wacom_i2c - Add support for distance and tilt x/y
  Input: wacom_i2c - Clean up the query device fields
  Input: wacom_i2c - Add support for vdd regulator
  Input: wacom_i2c - Use macros for the bit masks
  Input: wacom_i2c - Allow flipping the values from the DT
  ARM: imx_v6_v7_defconfig: Enable Wacom I2C
  ARM: dts: imx7d: remarkable2: add wacom digitizer device

 .../input/touchscreen/wacom,generic.yaml      |  66 ++++++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/boot/dts/imx7d-remarkable2.dts       |  61 ++++++
 arch/arm/configs/imx_v6_v7_defconfig          |   1 +
 drivers/input/touchscreen/wacom_i2c.c         | 203 ++++++++++++++----
 5 files changed, 297 insertions(+), 36 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/wacom,generic.yaml

-- 
2.31.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux