Hi, On Wed, 15 Sep 2021 11:57:11 +0300, Vyacheslav Bocharov wrote: > Add support for new home automation devices. > > JetHome Jethub D1 (http://jethome.ru/jethub-d1) is a home automation controller with the following features: > - DIN Rail Mounting > - Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz > - no video out > - 512Mb/1GB LPDDR4 > - 8/16GB eMMC flash > - 1 x USB 2.0 > - 1 x 10/100Mbps ethernet > - WiFi / Bluetooth AMPAK AP6255 (Broadcom BCM43455) IEEE 802.11a/b/g/n/ac, Bluetooth 4.2. > - TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support. > - 2 x gpio LEDS > - GPIO user Button > - 1 x 1-Wire > - 2 x RS-485 > - 4 x dry contact digital GPIO inputs > - 3 x relay GPIO outputs > - DC source with a voltage of 9 to 56 V / Passive POE > > [...] Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v5.16/dt64) [1/4] dt-bindings: arm: amlogic: add bindings for Jethub D1/H1 https://git.kernel.org/amlogic/c/c649e25c0fcd53e0f1e83f710fefbda9d2809c32 [2/4] dt-bindings: vendor-prefixes: add jethome prefix https://git.kernel.org/amlogic/c/a1732cca0ed3d1ac2a256d16302c93443d636146 [3/4] arm64: dts: meson-gxl: add support for JetHub H1 https://git.kernel.org/amlogic/c/abfaae24ecf3e7f00508b60fa05e2b6789b8f607 [4/4] arm64: dts: meson-axg: add support for JetHub D1 https://git.kernel.org/amlogic/c/8e279fb2903990cc6296ec56b3b80b2f854b6c79 -- Neil
