Add support for new home automation devices. JetHome Jethub D1 (http://jethome.ru/jethub-d1) is a home automation controller with the following features: - DIN Rail Mounting - Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz - no video out - 512Mb/1GB LPDDR4 - 8/16GB eMMC flash - 1 x USB 2.0 - 1 x 10/100Mbps ethernet - WiFi / Bluetooth AMPAK AP6255 (Broadcom BCM43455) IEEE 802.11a/b/g/n/ac, Bluetooth 4.2. - TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support. - 2 x gpio LEDS - GPIO user Button - 1 x 1-Wire - 2 x RS-485 - 4 x dry contact digital GPIO inputs - 3 x relay GPIO outputs - DC source with a voltage of 9 to 56 V / Passive POE JetHome Jethub H1 (http://jethome.ru/jethub-h1) is a home automation controller with the following features: - square plastic case - Amlogic S905W (ARM Cortex-A53) quad-core up to 1.5GHz - no video out - 1GB LPDDR4 - 8/16GB eMMC flash - 2 x USB 2.0 - 1 x 10/100Mbps ethernet - WiFi / Bluetooth RTL8822CS IEEE 802.11a/b/g/n/ac, Bluetooth 5.0. - TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support. - MicroSD 2.x/3.x/4.x DS/HS cards. - 1 x gpio LED - ADC user Button - DC source 5V microUSB Changes from v4: - add 1wire-gpio node in meson-axg-jethome-jethub-j100.dts Changes from v3: - add pinctrl for spicc1 in meson-axg-jethome-jethub-j100.dts Changes from v2: - add new vendor to vendor-prefixes - sync board compatible dt-bindings to jethome,jethub-* - fix efuse fields - fix gpio-line-names - fix spaces and blank lines - recheck via checkpatch Changes from v1: - rearrange patches - add SPDX license and copyright header - remove attributes without bindings - small fixes with spaces Vyacheslav Bocharov (4): dt-bindings: arm: amlogic: add bindings for Jethub D1/H1 dt-bindings: vendor-prefixes: add jethome prefix arm64: dts: meson-gxl: add support for JetHub H1 arm64: dts: meson-axg: add support for JetHub D1 .../devicetree/bindings/arm/amlogic.yaml | 2 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm64/boot/dts/amlogic/Makefile | 2 + .../amlogic/meson-axg-jethome-jethub-j100.dts | 361 ++++++++++++++++++ .../meson-gxl-s905w-jethome-jethub-j80.dts | 241 ++++++++++++ 5 files changed, 608 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts -- 2.30.2
