On the LS1028A this instance of the eSDHC controller is intended for
either an eMMC or eSDIO card. It doesn't provide a card detect pin and
its IO voltage is fixed at 1.8V.
Remove the bogus broken-cd property, instead add the non-removable
property. Fix the voltage-ranges property and set it to 1.8V only.
Fixes: 491d3a3fc113 ("arm64: dts: ls1028a: Add esdhc node in dts")
Signed-off-by: Michael Walle <michael@xxxxxxxx>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index ef771bfad11c..8cee1f79e5c0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -407,9 +407,9 @@ esdhc1: mmc@2150000 {
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>; /* fixed up by bootloader */
clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
- voltage-ranges = <1800 1800 3300 3300>;
+ voltage-ranges = <1800 1800>;
sdhci,auto-cmd12;
- broken-cd;
+ non-removable;
little-endian;
bus-width = <4>;
status = "disabled";
--
2.30.2
