Add entries from Documentation/ABI/testing/sysfs-bus-iio-scd30 to Documentation/ABI/testing/sysfs-bus-iio. The attributes of the scd4x and scd30 are common. Remove Documentation/ABI/testing/sysfs-bus-iio-scd30. Signed-off-by: Roan van Dijk <roan@xxxxxxxxxxx> --- Documentation/ABI/testing/sysfs-bus-iio | 35 +++++++++++++++++++ Documentation/ABI/testing/sysfs-bus-iio-scd30 | 34 ------------------ 2 files changed, 35 insertions(+), 34 deletions(-) delete mode 100644 Documentation/ABI/testing/sysfs-bus-iio-scd30 diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 6ad47a67521c..56492c564f72 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -1957,3 +1957,38 @@ Description: Specify the percent for light sensor relative to the channel absolute value that a data field should change before an event is generated. Units are a percentage of the prior reading. + +What: /sys/bus/iio/devices/iio:deviceX/calibration_auto_enable +Date: June 2020 +KernelVersion: 5.8 +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + Contaminants build-up in the measurement chamber or optical + elements deterioration leads to sensor drift. + + One can compensate for sensor drift by using automatic self + calibration procedure (asc). + + Writing 1 or 0 to this attribute will respectively activate or + deactivate asc. + + Upon reading current asc status is returned. + +What: /sys/bus/iio/devices/iio:deviceX/calibration_forced_value +Date: June 2020 +KernelVersion: 5.8 +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + Contaminants build-up in the measurement chamber or optical + elements deterioration leads to sensor drift. + + One can compensate for sensor drift by using forced + recalibration (frc). This is useful in case there's known + co2 reference available nearby the sensor. + + Picking value from the range [400 1 2000] and writing it to the + sensor will set frc. + + Upon reading current frc value is returned. Note that after + power cycling default value (i.e 400) is returned even though + internally sensor had recalibrated itself. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-scd30 b/Documentation/ABI/testing/sysfs-bus-iio-scd30 deleted file mode 100644 index b9712f390bec..000000000000 --- a/Documentation/ABI/testing/sysfs-bus-iio-scd30 +++ /dev/null @@ -1,34 +0,0 @@ -What: /sys/bus/iio/devices/iio:deviceX/calibration_auto_enable -Date: June 2020 -KernelVersion: 5.8 -Contact: linux-iio@xxxxxxxxxxxxxxx -Description: - Contaminants build-up in the measurement chamber or optical - elements deterioration leads to sensor drift. - - One can compensate for sensor drift by using automatic self - calibration procedure (asc). - - Writing 1 or 0 to this attribute will respectively activate or - deactivate asc. - - Upon reading current asc status is returned. - -What: /sys/bus/iio/devices/iio:deviceX/calibration_forced_value -Date: June 2020 -KernelVersion: 5.8 -Contact: linux-iio@xxxxxxxxxxxxxxx -Description: - Contaminants build-up in the measurement chamber or optical - elements deterioration leads to sensor drift. - - One can compensate for sensor drift by using forced - recalibration (frc). This is useful in case there's known - co2 reference available nearby the sensor. - - Picking value from the range [400 1 2000] and writing it to the - sensor will set frc. - - Upon reading current frc value is returned. Note that after - power cycling default value (i.e 400) is returned even though - internally sensor had recalibrated itself. -- 2.30.2
