On Sat, Sep 04, 2021 at 01:15:36AM +0200, Nicolas Frattaroli wrote:
> On the Quartz64 Model A, the I2S1 TDM controller is connected
> to the rk817 codec in I2S mode. Enabling it and adding the
> necessary simple-sound-card and codec nodes allows for analog
> audio output on the PINE64 Quartz64 Model A SBC.
>
> Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@xxxxxxxxx>
> ---
> .../boot/dts/rockchip/rk3566-quartz64-a.dts | 35 ++++++++++++++++++-
> 1 file changed, 34 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
> index a244f7b87e38..3a87c0240b30 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
> @@ -58,6 +58,20 @@ led-diy {
> };
> };
>
> + rk817-sound {
> + compatible = "simple-audio-card";
> + simple-audio-card,format = "i2s";
> + simple-audio-card,name = "Analog RK817";
> + simple-audio-card,mclk-fs = <256>;
> +
> + simple-audio-card,cpu {
> + sound-dai = <&i2s1_8ch>;
> + };
> + simple-audio-card,codec {
> + sound-dai = <&rk817>;
> + };
> + };
> +
> vcc12v_dcin: vcc12v_dcin {
> compatible = "regulator-fixed";
> regulator-name = "vcc12v_dcin";
> @@ -199,8 +213,13 @@ rk817: pmic@20 {
> interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
> clock-output-names = "rk808-clkout1", "rk808-clkout2";
>
> + #sound-dai-cells = <0>;
> + clock-names = "mclk";
> + clocks = <&cru I2S1_MCLKOUT_TX>;
> + assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
> + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
> pinctrl-names = "default";
> - pinctrl-0 = <&pmic_int_l>;
> + pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
> rockchip,system-power-controller;
> wakeup-source;
> #clock-cells = <1>;
> @@ -389,9 +408,23 @@ regulator-state-mem {
> };
> };
> };
> +
> + rk817_codec: codec {
This node should be optional and can probably be removed. It's only
used when there are extra parameters to pass to the codec (such as
rockchip,mic-in-differential). Leaving it in shouldn't hurt anything
though.
> + };
> +
> };
> };
>
> +&i2s1_8ch {
> + status = "okay";
> + rockchip,trcm-sync-tx-only;
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2s1m0_sclktx
> + &i2s1m0_lrcktx
> + &i2s1m0_sdi0
> + &i2s1m0_sdo0>;
> +};
> +
> &mdio1 {
> rgmii_phy1: ethernet-phy@0 {
> compatible = "ethernet-phy-ieee802.3-c22";
> --
> 2.33.0
>
