On 9/3/21 6:20 AM, Srinivas Kandagatla wrote:
> Audioreach module configuration helpers, which will be used by
> the q6apm-dai driver.
>
> Also add Kconfig and Makefile changes as now all the code for audioreach
> and q6apm are in at this point.
separate patches?
> +int audioreach_graph_send_cmd_sync(struct q6apm_graph *graph,
> + struct gpr_pkt *pkt, uint32_t rsp_opcode)
> +{
> +
> + struct device *dev = graph->dev;
> + struct gpr_hdr *hdr = &pkt->hdr;
> + int rc;
> +
> + mutex_lock(&graph->cmd_lock);
> + graph->result.opcode = 0;
> + graph->result.status = 0;
> +
> + rc = gpr_send_port_pkt(graph->port, pkt);
> + if (rc < 0)
> + goto err;
> +
> + if (rsp_opcode)
> + rc = wait_event_timeout(graph->cmd_wait,
> + (graph->result.opcode == hdr->opcode) ||
> + (graph->result.opcode == rsp_opcode),
> + 5 * HZ);
> + else
> + rc = wait_event_timeout(graph->cmd_wait,
> + (graph->result.opcode == hdr->opcode),
> + 5 * HZ);
> +
> + if (!rc) {
> + dev_err(dev, "CMD timeout for [%x] opcode\n", hdr->opcode);
> + rc = -ETIMEDOUT;
> + } else if (graph->result.status > 0) {
> + dev_err(dev, "DSP returned error[%x] %x\n", hdr->opcode,
> + graph->result.status);
> + rc = -EINVAL;
> + } else {
> + dev_err(dev, "DSP returned [%x]\n", graph->result.status);
> + rc = 0;
> + }
> +
> +err:
> + mutex_unlock(&graph->cmd_lock);
> + return rc;
> +}
> +EXPORT_SYMBOL_GPL(audioreach_graph_send_cmd_sync);
I'm pretty sure I've seen this code before...
This looks almost identical to
int q6apm_send_cmd_sync(struct q6apm *apm, struct gpr_pkt *pkt,
uint32_t rsp_opcode)
Can this be refactored?
If not, at the very least make sure the errors messages are unique...
> +static int audioreach_codec_dma_set_media_format(struct q6apm_graph *graph,
> + struct audioreach_module *module,
> + struct audioreach_module_config *cfg)
maybe explain what a 'codec dma' is?
> +{
> + struct apm_module_param_data *param_data;
> + struct apm_codec_dma_module_intf_cfg *intf_cfg;
> + struct apm_module_hw_ep_mf_cfg *hw_cfg;
> + struct apm_module_frame_size_factor_cfg *fs_cfg;
> + struct apm_module_hw_ep_power_mode_cfg *pm_cfg;
> + int ic_sz, ep_sz, fs_sz, pm_sz, dl_sz;
> + int rc, payload_size;
> + struct gpr_pkt *pkt;
> + void *p;
> +
> + ic_sz = APM_CDMA_INTF_CFG_PSIZE;
> + ep_sz = APM_HW_EP_CFG_PSIZE;
> + fs_sz = APM_FS_CFG_PSIZE;
> + pm_sz = APM_HW_EP_PMODE_CFG_PSIZE;
> + dl_sz = 0;
> +
> + payload_size = ic_sz + ep_sz + fs_sz + pm_sz + dl_sz;
> +
> + p = audioreach_alloc_apm_cmd_pkt(payload_size, APM_CMD_SET_CFG, 0);
> + if (IS_ERR(p))
> + return -ENOMEM;
> +
> + pkt = p;
> + p = p + GPR_HDR_SIZE + APM_CMD_HDR_SIZE;
> +
> + hw_cfg = p;
> + param_data = &hw_cfg->param_data;
> + param_data->module_instance_id = module->instance_id;
> + param_data->error_code = 0;
> + param_data->param_id = PARAM_ID_HW_EP_MF_CFG;
> + param_data->param_size = ep_sz - APM_MODULE_PARAM_DATA_SIZE;
> +
> + hw_cfg->mf.sample_rate = cfg->sample_rate;
> + hw_cfg->mf.bit_width = cfg->bit_width;
> + hw_cfg->mf.num_channels = cfg->num_channels;
> + hw_cfg->mf.data_format = module->data_format;
> + p += ep_sz;
> +
> + fs_cfg = p;
> + param_data = &fs_cfg->param_data;
> + param_data->module_instance_id = module->instance_id;
> + param_data->error_code = 0;
> + param_data->param_id = PARAM_ID_HW_EP_FRAME_SIZE_FACTOR;
> + param_data->param_size = fs_sz - APM_MODULE_PARAM_DATA_SIZE;
> + fs_cfg->frame_size_factor = 1;
> + p += fs_sz;
> +
> + intf_cfg = p;
> + param_data = &intf_cfg->param_data;
> + param_data->module_instance_id = module->instance_id;
> + param_data->error_code = 0;
> + param_data->param_id = PARAM_ID_CODEC_DMA_INTF_CFG;
> + param_data->param_size = ic_sz - APM_MODULE_PARAM_DATA_SIZE;
> +
> + intf_cfg->cfg.lpaif_type = module->hw_interface_type;
> + intf_cfg->cfg.intf_index = module->hw_interface_idx;
> + intf_cfg->cfg.active_channels_mask = (1 << cfg->num_channels) - 1;
> + p += ic_sz;
> +
> + pm_cfg = p;
> + param_data = &pm_cfg->param_data;
> + param_data->module_instance_id = module->instance_id;
> + param_data->error_code = 0;
> + param_data->param_id = PARAM_ID_HW_EP_POWER_MODE_CFG;
> + param_data->param_size = pm_sz - APM_MODULE_PARAM_DATA_SIZE;
> + pm_cfg->power_mode.power_mode = 0;
> +
> + rc = q6apm_send_cmd_sync(graph->apm, pkt, 0);
> +
> + kfree(pkt);
> +
> + return rc;
> +}
> +
> +static int audioreach_i2s_set_media_format(struct q6apm_graph *graph,
> + struct audioreach_module *module,
> + struct audioreach_module_config *cfg)
> +{
> + struct apm_module_frame_size_factor_cfg *fs_cfg;
> + struct apm_module_param_data *param_data;
> + struct apm_i2s_module_intf_cfg *intf_cfg;
> + struct apm_module_hw_ep_mf_cfg *hw_cfg;
> + int ic_sz, ep_sz, fs_sz;
> + int rc, payload_size;
> + struct gpr_pkt *pkt;
> + void *p;
> +
> + ic_sz = APM_I2S_INTF_CFG_PSIZE;
> + ep_sz = APM_HW_EP_CFG_PSIZE;
> + fs_sz = APM_FS_CFG_PSIZE;
> +
> + payload_size = ic_sz + ep_sz + fs_sz;
> +
> + p = audioreach_alloc_apm_cmd_pkt(payload_size, APM_CMD_SET_CFG, 0);
> + if (IS_ERR(p))
> + return -ENOMEM;
> +
> + pkt = p;
> + p = p + GPR_HDR_SIZE + APM_CMD_HDR_SIZE;
> + intf_cfg = p;
> +
> + param_data = &intf_cfg->param_data;
> + param_data->module_instance_id = module->instance_id;
> + param_data->error_code = 0;
> + param_data->param_id = PARAM_ID_I2S_INTF_CFG;
> + param_data->param_size = ic_sz - APM_MODULE_PARAM_DATA_SIZE;
> +
> + intf_cfg->cfg.intf_idx = module->hw_interface_idx;
> + intf_cfg->cfg.sd_line_idx = module->sd_line_idx;
> +
> + switch (cfg->fmt & SND_SOC_DAIFMT_MASTER_MASK) {
> + case SND_SOC_DAIFMT_CBS_CFS:
CBC_CFC
> + intf_cfg->cfg.ws_src = CONFIG_I2S_WS_SRC_INTERNAL;
> + break;
> + case SND_SOC_DAIFMT_CBM_CFM:
CBP_CFP
> + /* CPU is slave */
> + intf_cfg->cfg.ws_src = CONFIG_I2S_WS_SRC_EXTERNAL;
> + break;
> + default:
> + break;
> + }
> +
> + p += ic_sz;
> + hw_cfg = p;
> + param_data = &hw_cfg->param_data;
> + param_data->module_instance_id = module->instance_id;
> + param_data->error_code = 0;
> + param_data->param_id = PARAM_ID_HW_EP_MF_CFG;
> + param_data->param_size = ep_sz - APM_MODULE_PARAM_DATA_SIZE;
> +
> + hw_cfg->mf.sample_rate = cfg->sample_rate;
> + hw_cfg->mf.bit_width = cfg->bit_width;
> + hw_cfg->mf.num_channels = cfg->num_channels;
> + hw_cfg->mf.data_format = module->data_format;
> +
> + p += ep_sz;
> + fs_cfg = p;
> + param_data = &fs_cfg->param_data;
> + param_data->module_instance_id = module->instance_id;
> + param_data->error_code = 0;
> + param_data->param_id = PARAM_ID_HW_EP_FRAME_SIZE_FACTOR;
> + param_data->param_size = fs_sz - APM_MODULE_PARAM_DATA_SIZE;
> + fs_cfg->frame_size_factor = 1;
> +
> + rc = q6apm_send_cmd_sync(graph->apm, pkt, 0);
> +
> + kfree(pkt);
> +
> + return rc;
> +}
> +
> +static int audioreach_logging_set_media_format(struct q6apm_graph *graph,
> + struct audioreach_module *module)
> +{
> + struct apm_module_param_data *param_data;
> + struct data_logging_config *cfg;
> + int rc, payload_size;
> + struct gpr_pkt *pkt;
> + void *p;
> +
> + payload_size = sizeof(*cfg) + APM_MODULE_PARAM_DATA_SIZE;
> + p = audioreach_alloc_apm_cmd_pkt(payload_size, APM_CMD_SET_CFG, 0);
> + if (IS_ERR(p))
> + return -ENOMEM;
> +
> + pkt = p;
> + p = p + GPR_HDR_SIZE + APM_CMD_HDR_SIZE;
> +
> + param_data = p;
> + param_data->module_instance_id = module->instance_id;
> + param_data->error_code = 0;
> + param_data->param_id = PARAM_ID_DATA_LOGGING_CONFIG;
> + param_data->param_size = payload_size - APM_MODULE_PARAM_DATA_SIZE;
> +
> + p = p + APM_MODULE_PARAM_DATA_SIZE;
> + cfg = p;
> + cfg->log_code = module->log_code;
> + cfg->log_tap_point_id = module->log_tap_point_id;
> + cfg->mode = module->mode;
> +
> + rc = q6apm_send_cmd_sync(graph->apm, pkt, 0);
> +
> + kfree(pkt);
it would be simpler and easier on the reviewer if you allocated and
freed the same variable.
pkt = audioreach_alloc_apm_cmd_pkt(payload_size, APM_CMD_SET_CFG, 0);
p = (void*)pkt + GPR_HDR_SIZE + APM_CMD_HDR_SIZE;
...
kfree(pkt);
same comment for the rest of the code in this patch.
> +
> + return rc;
> +}
> +
> +int q6apm_map_memory_regions(struct q6apm_graph *graph,
> + unsigned int dir, phys_addr_t phys,
> + size_t period_sz, unsigned int periods)
> +{
> + struct audioreach_graph_data *data;
> + struct audio_buffer *buf;
> + unsigned long flags;
> + int cnt;
> + int rc;
> +
> + if (dir == SNDRV_PCM_STREAM_PLAYBACK)
> + data = &graph->rx_data;
> + else
> + data = &graph->tx_data;
> +
> + spin_lock_irqsave(&graph->lock, flags);
> +
> + if (data->buf) {
> + dev_err(graph->dev, "Buffer already allocated\n");
> + spin_unlock_irqrestore(&graph->lock, flags);
> + return 0;
> + }
> +
> + buf = kzalloc(((sizeof(struct audio_buffer)) * periods), GFP_ATOMIC);
Why GFP_ATOMIC?
> + if (!buf) {
> + spin_unlock_irqrestore(&graph->lock, flags);
> + return -ENOMEM;
> + }
> +
> + if (dir == SNDRV_PCM_STREAM_PLAYBACK)
> + data = &graph->rx_data;
> + else
> + data = &graph->tx_data;
> +
> + data->buf = buf;
> +
> + buf[0].phys = phys;
> + buf[0].size = period_sz;
> +
> + for (cnt = 1; cnt < periods; cnt++) {
> + if (period_sz > 0) {
> + buf[cnt].phys = buf[0].phys + (cnt * period_sz);
> + buf[cnt].size = period_sz;
> + }
> + }
> + data->num_periods = periods;
> +
> + spin_unlock_irqrestore(&graph->lock, flags);
> +
> + rc = audioreach_map_memory_regions(graph, dir, period_sz,
> + periods, 1);
> + if (rc < 0) {
> + dev_err(graph->dev, "Memory_map_regions failed\n");
> + audioreach_graph_free_buf(graph);
> + }
> +
> + return rc;
> +}
> +EXPORT_SYMBOL_GPL(q6apm_map_memory_regions);
> +int q6apm_write_async(struct q6apm_graph *graph, uint32_t len, uint32_t msw_ts,
> + uint32_t lsw_ts, uint32_t wflags)
> +{
> + struct gpr_pkt *pkt;
> + void *p;
> + int rc, payload_size, iid;
> + struct apm_data_cmd_wr_sh_mem_ep_data_buffer_v2 *write;
> + struct audio_buffer *ab;
> + unsigned long flags;
> +
> + payload_size = sizeof(*write);
> +
> + iid = q6apm_graph_get_rx_shmem_module_iid(graph);
> + p = audioreach_alloc_pkt(payload_size,
> + DATA_CMD_WR_SH_MEM_EP_DATA_BUFFER_V2,
> + graph->rx_data.dsp_buf | (len << APM_WRITE_TOKEN_LEN_SHIFT),
> + graph->port->id, iid);
> + if (IS_ERR(p))
> + return -ENOMEM;
> +
> + pkt = p;
> + p = p + GPR_HDR_SIZE;
> + write = p;
> +
> + spin_lock_irqsave(&graph->lock, flags);
> + ab = &graph->rx_data.buf[graph->rx_data.dsp_buf];
> +
> + write->buf_addr_lsw = lower_32_bits(ab->phys);
> + write->buf_addr_msw = upper_32_bits(ab->phys);
> + write->buf_size = len;
> + write->timestamp_lsw = lsw_ts;
> + write->timestamp_msw = msw_ts;
> + write->mem_map_handle = graph->rx_data.mem_map_handle;
> +
> + if (wflags == NO_TIMESTAMP)
> + write->flags = 0;
> + else
> + write->flags = 0x80000000;
BIT(31) ?
it's also odd to define NO_TIMESTAMP, it's usually when you want a
timestamp that you ask for it...
> +
> + graph->rx_data.dsp_buf++;
> +
> + if (graph->rx_data.dsp_buf >= graph->rx_data.num_periods)
> + graph->rx_data.dsp_buf = 0;
> +
> + spin_unlock_irqrestore(&graph->lock, flags);
> +
> + rc = gpr_send_port_pkt(graph->port, pkt);
> +
> + kfree(pkt);
> +
> + return rc;
> +}
> +EXPORT_SYMBOL_GPL(q6apm_write_async);
