Many thanks for reviewing v4. This version addresses all the comments
raised as part of v4 review.
This patchset adds ASoC driver support to configure signal processing
framework ("AudioReach") which is integral part of Qualcomm next
generation audio SDK and will be deployed on upcoming Qualcomm chipsets.
It makes use of ASoC Topology to load graphs on to the DSP which is then
managed by APM (Audio Processing Manager) service to prepare/start/stop.
Here is simplified high-level block diagram of AudioReach:
___________________________________________________________
| CPU (Application Processor) |
| +---------+ +---------+ +----------+ |
| | q6apm | | q6apm | | q6apm | |
| | dais | <------> | | <-----> |lpass-dais| |
| +---------+ +---------+ +----------+ |
| ^ ^ |
| | | +---------+ |
| +---------+ v +---------->|topology | |
| | q6prm | +---------+ | | |
| | |<-------->| GPR | +---------+ |
| +---------+ +---------+ |
| ^ ^ |
| | | |
| +----------+ | |
| | q6prm | | |
| |lpass-clks| | |
| +----------+ | |
|____________________________|______________________________|
|
| RPMSG (IPC over GLINK)
____________________________|______________________________
| | |
| +-----------------------+ |
| | | |
| v v q6 (Audio DSP) |
|+-----+ +----------------------------------+ |
|| PRM | | APM (Audio Processing Manager) | |
|+-----+ | . Graph Management | |
| | . Command Handing | |
| | . Event Management | |
| | ... | |
| +----------------------------------+ |
| ^ |
|____________________________|______________________________|
|
| LPASS AIF
____________________________|______________________________
| | Audio I/O |
| v |
| +--------------------------------------------------+ |
| | Audio devices | |
| | CODEC | HDMI-TX | PCM | SLIMBUS | I2S |MI2S |...| |
| | | |
| +--------------------------------------------------+ |
|___________________________________________________________|
AudioReach has constructs of sub-graph, container and modules.
Each sub-graph can have N containers and each Container can have N Modules
and connections between them can be linear or non-linear.
An audio function can be realized with one or many connected
sub-graphs. There are also control/event paths between modules that can
be wired up while building graph to achieve various control mechanism
between modules. These concepts of Sub-Graph, Containers and Modules
are represented in ASoC topology.
Here is simple I2S graph with a Write Shared Memory and a
Volume control module within a single Subgraph (1) with one Container (1)
and 5 modules.
____________________________________________________________
| Sub-Graph [1] |
| _______________________________________________________ |
| | Container [1] | |
| | [WR_SH] -> [PCM DEC] -> [PCM CONV] -> [VOL]-> [I2S-EP]| |
| |_______________________________________________________| |
|____________________________________________________________|
For now this graph is split into two subgraphs to achieve dpcm like below:
________________________________________________ _________________
| Sub-Graph [1] | | Sub-Graph [2] |
| ____________________________________________ | | _____________ |
| | Container [1] | | | |Container [2]| |
| | [WR_SH] -> [PCM DEC] -> [PCM CONV] -> [VOL]| | | | [I2S-EP] | |
| |____________________________________________| | | |_____________| |
|________________________________________________| |_________________|
_________________
| Sub-Graph [3] |
| _____________ |
| |Container [3]| |
| | [DMA-EP] | |
| |_____________| |
|_________________|
This patchset adds very minimal support for AudioReach which includes
supporting sub-graphs containing CODEC DMA ports and simple PCM
Decoder/Encoder and Logger Modules. Additional capabilities will
be built over time to expose features offered by AudioReach.
This patchset is Tested on SM8250 SoC based Qualcomm Robotics Platform RB5
and SM9250 MTP with WSA881X Smart Speaker Amplifiers, DMICs connected via
VA Macro and WCD938x Codec connected via TX and RX Macro and HDMI audio
via I2S.
First 10 Patches are mostly reorganization existing Old QDSP Audio
Framework code and bindings so that we could reuse them on AudioReach.
ASoC topology graphs for DragonBoard RB5 and SM8250 MTP are available at
https://git.linaro.org/people/srinivas.kandagatla/audioreach-topology.git/
Thanks,
srini
Changes since v4: only apr dt-binding changes.
- deprecated qcom,apr-domain dt-bindings to make it more reusable
- added more protection-domain list that have been missed during yaml conversion.
- remove "qcom,apr" compatible that was added by mistake during yaml conversion.
Srinivas Kandagatla (21):
soc: dt-bindings: qcom: apr: convert to yaml
soc: dt-bindings: qcom: apr: deprecate qcom,apr-domain property
soc: qcom: apr: make code more reuseable
soc: dt-bindings: qcom: add gpr bindings
soc: qcom: apr: Add GPR support
ASoC: dt-bindings: move LPASS dai related bindings out of q6afe
ASoC: dt-bindings: move LPASS clocks related bindings out of q6afe
ASoC: dt-bindings: rename q6afe.h to q6dsp-lpass-ports.h
ASoC: qdsp6: q6afe-dai: move lpass audio ports to common file
ASoC: qdsp6: q6afe-clocks: move audio-clocks to common file
ASoC: dt-bindings: q6dsp: add q6apm-lpass-dai compatible
ASoC: dt-bindings: lpass-clocks: add q6prm clocks compatible
ASoC: dt-bindings: add q6apm digital audio stream bindings
ASoC: qdsp6: audioreach: add basic pkt alloc support
ASoC: qdsp6: audioreach: add q6apm support
ASoC: qdsp6: audioreach: add module configuration command helpers
ASoC: qdsp6: audioreach: add topology support
ASoC: qdsp6: audioreach: add q6apm-dai support
ASoC: qdsp6: audioreach: add q6apm lpass dai support
ASoC: qdsp6: audioreach: add q6prm support
ASoC: qdsp6: audioreach: add support for q6prm-clocks
.../devicetree/bindings/soc/qcom/qcom,apr.txt | 134 --
.../bindings/soc/qcom/qcom,apr.yaml | 169 +++
.../devicetree/bindings/sound/qcom,q6afe.txt | 181 ---
.../bindings/sound/qcom,q6apm-dai.yaml | 50 +
.../sound/qcom,q6dsp-lpass-clocks.yaml | 74 ++
.../sound/qcom,q6dsp-lpass-ports.yaml | 202 +++
drivers/soc/qcom/Kconfig | 8 +
drivers/soc/qcom/apr.c | 289 +++-
include/dt-bindings/soc/qcom,gpr.h | 18 +
include/dt-bindings/sound/qcom,q6afe.h | 203 +--
.../sound/qcom,q6dsp-lpass-ports.h | 208 +++
include/linux/soc/qcom/apr.h | 70 +-
include/uapi/sound/snd_ar_tokens.h | 203 +++
sound/soc/qcom/Kconfig | 22 +
sound/soc/qcom/qdsp6/Makefile | 11 +-
sound/soc/qcom/qdsp6/audioreach.c | 1170 +++++++++++++++++
sound/soc/qcom/qdsp6/audioreach.h | 692 ++++++++++
sound/soc/qcom/qdsp6/q6afe-clocks.c | 187 +--
sound/soc/qcom/qdsp6/q6afe-dai.c | 687 +---------
sound/soc/qcom/qdsp6/q6apm-dai.c | 504 +++++++
sound/soc/qcom/qdsp6/q6apm-lpass-dais.c | 266 ++++
sound/soc/qcom/qdsp6/q6apm.c | 916 +++++++++++++
sound/soc/qcom/qdsp6/q6apm.h | 154 +++
sound/soc/qcom/qdsp6/q6dsp-lpass-clocks.c | 186 +++
sound/soc/qcom/qdsp6/q6dsp-lpass-clocks.h | 30 +
sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c | 627 +++++++++
sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h | 22 +
sound/soc/qcom/qdsp6/q6prm-clocks.c | 85 ++
sound/soc/qcom/qdsp6/q6prm.c | 256 ++++
sound/soc/qcom/qdsp6/q6prm.h | 78 ++
sound/soc/qcom/qdsp6/topology.c | 1118 ++++++++++++++++
31 files changed, 7406 insertions(+), 1414 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml
create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml
create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml
create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml
create mode 100644 include/dt-bindings/soc/qcom,gpr.h
create mode 100644 include/dt-bindings/sound/qcom,q6dsp-lpass-ports.h
create mode 100644 include/uapi/sound/snd_ar_tokens.h
create mode 100644 sound/soc/qcom/qdsp6/audioreach.c
create mode 100644 sound/soc/qcom/qdsp6/audioreach.h
create mode 100644 sound/soc/qcom/qdsp6/q6apm-dai.c
create mode 100644 sound/soc/qcom/qdsp6/q6apm-lpass-dais.c
create mode 100644 sound/soc/qcom/qdsp6/q6apm.c
create mode 100644 sound/soc/qcom/qdsp6/q6apm.h
create mode 100644 sound/soc/qcom/qdsp6/q6dsp-lpass-clocks.c
create mode 100644 sound/soc/qcom/qdsp6/q6dsp-lpass-clocks.h
create mode 100644 sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c
create mode 100644 sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h
create mode 100644 sound/soc/qcom/qdsp6/q6prm-clocks.c
create mode 100644 sound/soc/qcom/qdsp6/q6prm.c
create mode 100644 sound/soc/qcom/qdsp6/q6prm.h
create mode 100644 sound/soc/qcom/qdsp6/topology.c
--
2.21.0
