[PATCH v2 51/52] arm64: dts: allwinner: teres-i: Add missing reg

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The anx6345 bridge mandates that the input port is named port@0. Since
we have a unit-address, this implies that we need a reg property with
the same value, but it was found to be missing in the Teres-I device
tree. Make sure it's there.

Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
index 45e1abdf70a0..52e032f7fb68 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
@@ -139,6 +139,8 @@ ports {
 			#size-cells = <0>;
 
 			port@0 {
+				reg = <0>;
+
 				anx6345_in: endpoint {
 					remote-endpoint = <&tcon0_out_anx6345>;
 				};
-- 
2.31.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux