On Mon, Aug 30, 2021 at 08:36:01AM +0800, Zhiyong Tao wrote: > Change pull up/down description Every commit is a 'change'. Your commit msg should explain 'why', not what the diff is. > > Signed-off-by: Zhiyong Tao <zhiyong.tao@xxxxxxxxxxxx> > --- > .../bindings/pinctrl/pinctrl-mt8195.yaml | 32 +++++++++++++++++-- > 1 file changed, 29 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml > index 2f12ec59eee5..a341ed9f0095 100644 > --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml > @@ -85,9 +85,35 @@ patternProperties: > 2/4/6/8/10/12/14/16mA in mt8195. > enum: [0, 1, 2, 3, 4, 5, 6, 7] > > - bias-pull-down: true > - > - bias-pull-up: true > + bias-pull-down: > + description: | > + For pull down type is normal, it don't need add RSEL & R1R0 define > + and resistance value. > + For pull down type is PUPD/R0/R1 type, it can add R1R0 define to > + set different resistance. It can support "MTK_PUPD_SET_R1R0_00" & > + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11" > + define in mt8195. > + For pull down type is RSEL, it can add RSEL define & resistance value(ohm) > + to set different resistance. It can support "MTK_PULL_SET_RSEL_000" & > + "MTK_PULL_SET_RSEL_001" & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & > + "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & > + "MTK_PULL_SET_RSEL_111" define in mt8195. It can also support resistance value(ohm) > + "75000" & "5000" in mt8195. Sounds like constraints on the values. Please write a schema. > + > + bias-pull-up: > + description: | > + For pull up type is normal, it don't need add RSEL & R1R0 define > + and resistance value. > + For pull up type is PUPD/R0/R1 type, it can add R1R0 define to > + set different resistance. It can support "MTK_PUPD_SET_R1R0_00" & > + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11" > + define in mt8195. > + For pull up type is RSEL, it can add RSEL define & resistance value(ohm) > + to set different resistance. It can support "MTK_PULL_SET_RSEL_000" & > + "MTK_PULL_SET_RSEL_001" & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & > + "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & > + "MTK_PULL_SET_RSEL_111" define in mt8195. It can also support resistance value(ohm) > + "1000" & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" & "75000" in mt8195. > > bias-disable: true > > -- > 2.18.0 > >
