Change pull up/down description
Signed-off-by: Zhiyong Tao <zhiyong.tao@xxxxxxxxxxxx>
---
.../bindings/pinctrl/pinctrl-mt8195.yaml | 32 +++++++++++++++++--
1 file changed, 29 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
index 2f12ec59eee5..a341ed9f0095 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
@@ -85,9 +85,35 @@ patternProperties:
2/4/6/8/10/12/14/16mA in mt8195.
enum: [0, 1, 2, 3, 4, 5, 6, 7]
- bias-pull-down: true
-
- bias-pull-up: true
+ bias-pull-down:
+ description: |
+ For pull down type is normal, it don't need add RSEL & R1R0 define
+ and resistance value.
+ For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
+ set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+ "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11"
+ define in mt8195.
+ For pull down type is RSEL, it can add RSEL define & resistance value(ohm)
+ to set different resistance. It can support "MTK_PULL_SET_RSEL_000" &
+ "MTK_PULL_SET_RSEL_001" & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" &
+ "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" &
+ "MTK_PULL_SET_RSEL_111" define in mt8195. It can also support resistance value(ohm)
+ "75000" & "5000" in mt8195.
+
+ bias-pull-up:
+ description: |
+ For pull up type is normal, it don't need add RSEL & R1R0 define
+ and resistance value.
+ For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
+ set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+ "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11"
+ define in mt8195.
+ For pull up type is RSEL, it can add RSEL define & resistance value(ohm)
+ to set different resistance. It can support "MTK_PULL_SET_RSEL_000" &
+ "MTK_PULL_SET_RSEL_001" & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" &
+ "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" &
+ "MTK_PULL_SET_RSEL_111" define in mt8195. It can also support resistance value(ohm)
+ "1000" & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" & "75000" in mt8195.
bias-disable: true
--
2.18.0
