Hi,
On 8/28/2021 6:47 PM, Konrad Dybcio wrote:
Add a base DT for SM6350 SoC
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm6350.dtsi | 487 +++++++++++++++++++++++++++
1 file changed, 487 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sm6350.dtsi
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
new file mode 100644
index 000000000000..9a9797f5a55b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -0,0 +1,487 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+ interrupt-parent = <&intc>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ clocks {
+ xo_board: xo-board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <76800000>;
+ clock-output-names = "xo_board";
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <32764>;
+ #clock-cells = <0>;
+ };
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "qcom,kryo560";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
+ next-level-cache = <&L2_0>;
+ #cooling-cells = <2>;
+ L2_0: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ L3_0: l3-cache {
+ compatible = "cache";
+ };
+ };
+ };
+
+ CPU1: cpu@100 {
+ device_type = "cpu";
+ compatible = "qcom,kryo560";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
+ next-level-cache = <&L2_100>;
+ #cooling-cells = <2>;
+ L2_100: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU2: cpu@200 {
+ device_type = "cpu";
+ compatible = "qcom,kryo560";
+ reg = <0x0 0x200>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
+ next-level-cache = <&L2_200>;
+ #cooling-cells = <2>;
+ L2_200: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU3: cpu@300 {
+ device_type = "cpu";
+ compatible = "qcom,kryo560";
+ reg = <0x0 0x300>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
+ next-level-cache = <&L2_300>;
+ #cooling-cells = <2>;
+ L2_300: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU4: cpu@400 {
+ device_type = "cpu";
+ compatible = "qcom,kryo560";
+ reg = <0x0 0x400>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
+ next-level-cache = <&L2_400>;
+ #cooling-cells = <2>;
+ L2_400: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU5: cpu@500 {
+ device_type = "cpu";
+ compatible = "qcom,kryo560";
+ reg = <0x0 0x500>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
+ next-level-cache = <&L2_500>;
+ #cooling-cells = <2>;
+ L2_500: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+
+ };
+
+ CPU6: cpu@600 {
+ device_type = "cpu";
+ compatible = "qcom,kryo560";
+ reg = <0x0 0x600>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1894>;
+ dynamic-power-coefficient = <703>;
+ next-level-cache = <&L2_600>;
+ #cooling-cells = <2>;
+ L2_600: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU7: cpu@700 {
+ device_type = "cpu";
+ compatible = "qcom,kryo560";
+ reg = <0x0 0x700>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1894>;
+ dynamic-power-coefficient = <703>;
+ next-level-cache = <&L2_700>;
+ #cooling-cells = <2>;
+ L2_700: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+
+ core1 {
+ cpu = <&CPU1>;
+ };
+
+ core2 {
+ cpu = <&CPU2>;
+ };
+
+ core3 {
+ cpu = <&CPU3>;
+ };
+
+ core4 {
+ cpu = <&CPU4>;
+ };
+
+ core5 {
+ cpu = <&CPU5>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&CPU6>;
+ };
+
+ core1 {
+ cpu = <&CPU7>;
+ };
+ };
+ };
+ };
+
+ firmware {
+ scm: scm {
+ compatible = "qcom,scm-sm6350", "qcom,scm";
+ #reset-cells = <1>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the size */
+ reg = <0x0 0x80000000 0x0 0x0>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ reserved_memory: reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ hyp_mem: memory@80000000 {
+ reg = <0 0x80000000 0 0x600000>;
+ no-map;
+ };
+
+ xbl_aop_mem: memory@80700000 {
+ reg = <0 0x80700000 0 0x160000>;
+ no-map;
+ };
+
+ cmd_db: memory@80860000 {
+ compatible = "qcom,cmd-db";
+ reg = <0 0x80860000 0 0x20000>;
+ no-map;
+ };
+
+ sec_apps_mem: memory@808ff000 {
+ reg = <0 0x808ff000 0 0x1000>;
+ no-map;
+ };
+
+ smem_mem: memory@80900000 {
+ reg = <0 0x80900000 0 0x200000>;
+ no-map;
+ };
+
+ cdsp_sec_mem: memory@80b00000 {
+ reg = <0 0x80b00000 0 0x1e00000>;
+ no-map;
+ };
+
+ pil_camera_mem: memory@86000000 {
+ reg = <0 0x86000000 0 0x500000>;
+ no-map;
+ };
+
+ pil_npu_mem: memory@86500000 {
+ reg = <0 0x86500000 0 0x500000>;
+ no-map;
+ };
+
+ pil_video_mem: memory@86a00000 {
+ reg = <0 0x86a00000 0 0x500000>;
+ no-map;
+ };
+
+ pil_cdsp_mem: memory@86f00000 {
+ reg = <0 0x86f00000 0 0x1e00000>;
+ no-map;
+ };
+
+ pil_adsp_mem: memory@88d00000 {
+ reg = <0 0x88d00000 0 0x2800000>;
+ no-map;
+ };
+
+ wlan_fw_mem: memory@8b500000 {
+ reg = <0 0x8b500000 0 0x200000>;
+ no-map;
+ };
+
+ pil_ipa_fw_mem: memory@8b700000 {
+ reg = <0 0x8b700000 0 0x10000>;
+ no-map;
+ };
+
+ pil_ipa_gsi_mem: memory@8b710000 {
+ reg = <0 0x8b710000 0 0x5400>;
+ no-map;
+ };
+
+ pil_gpu_mem: memory@8b715400 {
+ reg = <0 0x8b715400 0 0x2000>;
+ no-map;
+ };
+
+ pil_modem_mem: memory@8b800000 {
+ reg = <0 0x8b800000 0 0xf800000>;
+ no-map;
+ };
+
+ cont_splash_memory: memory@a0000000 {
+ reg = <0 0xa0000000 0 0x2300000>;
+ no-map;
+ };
+
+ dfps_data_memory: memory@a2300000 {
+ reg = <0 0xa2300000 0 0x100000>;
+ no-map;
+ };
+
+ removed_region: memory@c0000000 {
+ reg = <0 0xc0000000 0 0x3900000>;
+ no-map;
+ };
+
+ debug_region: memory@ffb00000 {
+ reg = <0 0xffb00000 0 0xc0000>;
+ no-map;
+ };
+
+ last_log_region: memory@ffbc0000 {
+ reg = <0 0xffbc0000 0 0x40000>;
+ no-map;
+ };
+
+ ramoops: ramoops@ffc00000 {
+ compatible = "removed-dma-pool", "ramoops";
+ reg = <0 0xffc00000 0 0x00100000>;
+ record-size = <0x1000>;
+ console-size = <0x40000>;
+ ftrace-size = <0x0>;
+ msg-size = <0x20000 0x20000>;
+ cc-size = <0x0>;
+ no-map;
+ };
+
+ cmdline_region: memory@ffd00000 {
+ reg = <0 0xffd00000 0 0x1000>;
+ no-map;
+ };
+ };
+
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_mem>;
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ soc: soc@0 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0 0 0 0 0x10 0>;
+ dma-ranges = <0 0 0 0 0x10 0>;
+ compatible = "simple-bus";
+
+ ipcc: mailbox@408000 {
+ compatible = "qcom,sm6350-ipcc", "qcom,ipcc";
+ reg = <0 0x00408000 0 0x1000>;
+ interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #mbox-cells = <2>;
+ };
+
+ tcsr_mutex: hwlock@1f40000 {
+ compatible = "qcom,tcsr-mutex";
+ reg = <0x0 0x01f40000 0x0 0x40000>;
+ #hwlock-cells = <1>;
+ };
+
+ pdc: interrupt-controller@b220000 {
+ compatible = "qcom,sm6350-pdc", "qcom,pdc";
+ reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x64>;
The second reg 0x17c000f0 is neither documented nor used in PDC irq
chip driver. can you please remove it?
Thanks,
Maulik
+ qcom,pdc-ranges = <0 480 94>, <94 609 31>,
+ <125 63 1>, <126 655 12>, <138 139 15>;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ };
+
+ intc: interrupt-controller@17a00000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
+ <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
+ interrupts = <GIC_PPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ watchdog@17c10000 {
+ compatible = "qcom,apss-wdt-sm6350", "qcom,kpss-wdt";
+ reg = <0 0x17c10000 0 0x1000>;
+ clocks = <&sleep_clk>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ timer@17c20000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x0 0x17c20000 0x0 0x1000>;
+ clock-frequency = <19200000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ frame@17c21000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c21000 0x0 0x1000>,
+ <0x0 0x17c22000 0x0 0x1000>;
+ };
+
+ frame@17c23000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c23000 0x0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c25000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c25000 0x0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c27000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c27000 0x0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c29000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c29000 0x0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c2b000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c2b000 0x0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c2d000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c2d000 0x0 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ apps_rsc: rsc@18200000 {
+ compatible = "qcom,rpmh-rsc";
+ label = "apps_rsc";
+ reg = <0x0 0x18200000 0x0 0x10000>,
+ <0x0 0x18210000 0x0 0x10000>,
+ <0x0 0x18220000 0x0 0x10000>;
+ reg-names = "drv-0", "drv-1", "drv-2";
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,tcs-offset = <0xd00>;
+ qcom,drv-id = <2>;
+ qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
+ <WAKE_TCS 3>, <CONTROL_TCS 1>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ clock-frequency = <19200000>;
+ interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+};
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
