On 28.08.2021 17:47, Maulik Shah wrote:
> Hi,
>
> On 8/28/2021 6:48 PM, Konrad Dybcio wrote:
>> Add TLMM pinctrl node to enable referencing the SoC pins in other nodes.
>>
>> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
>> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
>> ---
>> Changes since v1:
>> - Fix the gpio ranges from 156 to 157
>>
>> arch/arm64/boot/dts/qcom/sm6350.dtsi | 19 +++++++++++++++++++
>> 1 file changed, 19 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
>> index d57c669ae0d6..03f7601457b4 100644
>> --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
>> @@ -406,6 +406,25 @@ pdc: interrupt-controller@b220000 {
>> interrupt-controller;
>> };
>> + tlmm: pinctrl@f100000 {
>> + compatible = "qcom,sm6350-tlmm";
>> + reg = <0 0x0f100000 0 0x300000>;
>> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
> you will not require other interrupts (209 to 216) for dual edge to work since you have below set in pinctrl-sm6350.c
>
> .wakeirq_dual_edge_errata = true,
>
> Thanks,
> Maulik
Right, I updated the binding but not the dt... Thanks for spotting that.
Konrad
